简要说明：AMETEK GEMCO 牌的专业销售AMETEK GEMCO 产品,1989A32R12SCOLUM原装进口,厂家直接供货产品：估价：1，规格：1989A32R12SCOLUM，产品系列编号：齐全

　　AMETEK GEMCO 1989A32R12SCOLUM  CONTROLLER 
   AMETEK GEMCO 1991-A-1-32-R-12-E-X  1991 QUIK-SET IV HIGH SPEED PLS, COMPLETE SYSTEM CPU AND KEYPAD, 110 VAC 50/60 HZ, 32 OUTPUT CIRCUITS, RESOLVER INPUT, 4096 POSITIONS, 12 BIT RESOLUTI 
   AMETEK GEMCO 1989A16R12SEKX12  1989 QUIK-SET III MULTITURN PLS; COMPLETE SYSTEM CPU AND KEYPAD.; 16 OUTPUT CIRCUITS; RESOLVER; 4,096 POSITIONS; SINGLE TURN RESOLVER; CURRENT SINKING 
   AMETEK GEMCO 1991-A-1-16-R-12-E-X  1991 QUIK-SET IV HIGH SPEED PLS, COMPLETE SYSTEM CPU AND KEYPAD, 110 VAC 50/60 HZ, 16 OUTPUT CIRCUITS, RESOLVER INPUT, 4096 POSITIONS, 12 BIT RESOLUTI 
   AMETEK GEMCO 469P5HIA20T  PROTECTION MOD 
   AMETEK GEMCO 19911515  SWITCH 
   AMETEK GEMCO 1989-A-16-R-12-S-C-K-X  1989 QUIK-SET III MULTITURN PLS, COMPLETE SYSTEM CPU AND KEYPAD, 16 OUTPUT CIRCUITS, RESOLVER INPUT, 4,096 POSITIONS(12 BIT RESOLUTION), SINGLE TURN R 
     AMETEK GEMCO 1771PLSB1  1771 HIGH SPEED PLS, STANDARD 14 BIT RESOLUTION, HIGH SPEED ADDITIONAL OUTPUT 
   AMETEK GEMCO 925-B1-96-72-M-X  925 LINEAR CABLE REEL SENSOR; SENSOR WITH FACTORY INSTALLED HARDWARE OPTIONS; 193 - 480 INCH STROKE, SINGLE SPRING; 96 ACTIVE STROKE IN INCHES; 72 INC 
     AMETEK GEMCO 1989-A16R12SCM  CONTROLLER 
   AMETEK GEMCO 909-24-AA-8-R-SPPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE 
   AMETEK GEMCO 909-24-AA-8-L-SPPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POL 
   AMETEK GEMCO 909-24-AA-8-R-SPP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE 
   AMETEK GEMCO 909-24-AA-8-L-SPP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POL 
   AMETEK GEMCO 909-24-AA-8-R-SPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE 
   AMETEK GEMCO 909-24-AA-8-L-SPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POL 
   AMETEK GEMCO 909-24-AA-8-R-SP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE 
   AMETEK GEMCO 909-24-AA-8-LSP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POL 
   AMETEK GEMCO 1989-1530A  PROGRAMMABLE LIMIT SWITCH HIGH SPEED 
   AMETEK GEMCO 909-12-AA-8-R-SPPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE 
   AMETEK GEMCO 909-12-AA-8-L-SPPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POL 
   AMETEK GEMCO 909-12-AA-8-R-SPP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE 
   AMETEK GEMCO 909-12-AA-8-L-SPP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POL 
   AMETEK GEMCO 909-12-AA-8-R-SPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE 
   AMETEK GEMCO 909-12-AA-8-L-SPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POL 
   AMETEK GEMCO 909-12-AA-8-R-SP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE 
   AMETEK GEMCO 909-12-AA-8-L-SP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH ACTUATOR ROD AND BARREL; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POL 
   AMETEK GEMCO 1989CA32R12SECST  MULTIFUNCTION 
   AMETEK GEMCO 909-24-BB-8-R-SPPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE DOUBLE THROW 
   AMETEK GEMCO 909-24-BB-8-L-SPPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 909-24-BB-8-R-SPP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH TAPE DRIVEL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 909-24-BB-8-L-SPP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 909-24-BB-8-R-SPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE DOUBLE THROW 
   AMETEK GEMCO 909-24-BB-8-L-SPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 909-24-BB-8-R-SP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE DOUBLE THROW 
   AMETEK GEMCO 909-24-BB-8-LSP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 24; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 909-12-BB-8-R-SPPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE DOUBLE THROW 
   AMETEK GEMCO 909-12-BB-8-L-SPPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 909-12-BB-8-R-SPP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH TAPE DRIVEL; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 909-12-BB-8-L-SPP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 909-12-BB-8-R-SPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE DOUBLE THROW 
   AMETEK GEMCO 909-12-BB-8-L-SPR  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 909-12-BB-8-R-SP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; LEFT HAND ASSEMBLY; SINGLE POLE DOUBLE THROW 
   AMETEK GEMCO 909-12-BB-8-LSP  909 KAM-WAY LINEAR LIMIT SWITCH ASSEMBLY; INCHES OF TRAVEL: 12; LIMIT SWITCH WITH TAPE DRIVE; 8 SWITCHES; RIGHT HAND ASSEMBLY; SINGLE POLE DOUBLE THRO 
   AMETEK GEMCO 1992CXXXX  1992 PRESS-SET CONTROLLER, CURRENT SOURCING, NO SOFTWARE OPTIONS, CONTROLLER ONLY, CONTROLLER ONLY, NO ENCLOSURE 
   AMETEK GEMCO 925-B1-96-72-S-X  925 LINEAR CABLE REEL SENSOR; SENSOR WITH FACTORY INSTALLED HARDWARE OPTIONS; 193 - 480 INCH STROKE, SINGLE SPRING; 96 ACTIVE STROKE IN INCHES; 72 INC 
   AMETEK GEMCO 925-B1-96-72-P1-X  925 LINEAR CABLE REEL SENSOR; SENSOR WITH FACTORY INSTALLED HARDWARE OPTIONS; 193 - 480 INCH STROKE, SINGLE SPRING; 96 ACTIVE STROKE IN INCHES; 72 INC 
     AMETEK GEMCO 1989-CA-1530A  PROGRAMMABLE LIMIT SWITCH HIGH SPEED 
   AMETEK GEMCO 1989A16R12SEK  CONTROL 
   AMETEK GEMCO 1999SEM  1999 SEMELEX II SAFETIMETER TEST SET, STANDARD SEMELEX SAFETIMETER TEST SET FOR FULL AND PART REVOLUTION CLUTCHES. INCLUDES METER, POSITION/VELOCITY T 
AMETEK GEMCO 1989-A-16-R-12-S-C-X  PROGRAMMABLE LIMIT SWITCH 
     AMETEK GEMCO 1989A16R12SEHCSBE  PROGRAMABLE LIMIT SWITCH 
     AMETEK GEMCO 1989-CA-16-R-12-S-E-B-E  CONTROLLER QUICKSET 3 
   AMETEK GEMCO 925-A2-96-72-M-X  925 LINEAR CABLE REEL SENSOR; SENSOR WITH FACTORY INSTALLED HARDWARE OPTIONS; 97 - 192 INCH STROKE; 96 ACTIVE STROKE IN INCHES; 72 INCH CABLE LEAD; SE 
     AMETEK GEMCO 1996CRSA12  1996 RAM-SET SHUT HEIGHT CONTROLLER, RS485 COMMUNICATION, NEMA 12 ENCLOSURE 
     AMETEK GEMCO 1989-CA-16-R-12-S-E-H-R  CONTROLLER QUICKSET 3 
   AMETEK GEMCO 925-A1-96-72-M-X  925 LINEAR CABLE REEL SENSOR, 0 - 96 INCH STROKE, 96 INCH ACTIVE STROKE, 72 INCH INITIAL CABLE LEAD, MULTI-TURN DUAL RESOLVER, NO OPTIONS 
   AMETEK GEMCO 1090B1  MULTIBUS HIGH SPEED PLS 
   AMETEK GEMCO 19801206LSPX  RESOLVER 
     AMETEK GEMCO 1989-CA-16-R-12-S-E-R  CONTROLLER QUICKSET 3 
   AMETEK GEMCO 19801206L  RESOLVER 
   AMETEK GEMCO 1980412XSPXS36L  LIMIT SWITCH 
   AMETEK GEMCO SD0284200S35R  RESOLVER 
   AMETEK GEMCO 1980706RDP  LIMIT SWITCH 
   AMETEK GEMCO 1980906RDP  LIMIT SWITCH 
    AMETEK GEMCO 1995-L-6M-P-X  MICRO-SET PROGAMMABLE LIMIT SWITCH 
   AMETEK GEMCO 925-A2-96-72-S-X  925 LINEAR CABLE REEL SENSOR; SENSOR WITH FACTORY INSTALLED HARDWARE OPTIONS; 97 - 192 INCH STROKE; 96 ACTIVE STROKE IN INCHES; 72 INCH CABLE LEAD; SE 
   AMETEK GEMCO 925-A2-96-72-P1-X  925 LINEAR CABLE REEL SENSOR; SENSOR WITH FACTORY INSTALLED HARDWARE OPTIONS; 97 - 192 INCH STROKE; 96 ACTIVE STROKE IN INCHES; 72 INCH CABLE LEAD; SE 
   AMETEK GEMCO 19861978  ENCODER 
   AMETEK GEMCO SD0410900  DUAL RESOLVER 64 TURNS 
   AMETEK GEMCO 925-A1-96-72-P1-X  925 LINEAR CABLE REEL SENSOR, 0 - 96 INCH STROKE, 96 INCH ACTIVE STROKE, 72 INCH INITIAL CABLE LEAD, SINGLE-TURN POTENTIOMETER, NO OPTIONS 
   AMETEK GEMCO 925-A1-96-72-S-X  925 LINEAR CABLE REEL SENSOR, 0 - 96 INCH STROKE, 96 INCH ACTIVE STROKE, 72 INCH INITIAL CABLE LEAD, SINGLE-TURN RESOLVER, NO OPTIONS 
   AMETEK GEMCO 19861681  ENCODER 
   AMETEK GEMCO 19801203RSPTD2  SWITCH 
   AMETEK GEMCO 1746L-2  TWO AXIS LDT INTERFACE, TWO LDT INPUTS 
   AMETEK GEMCO 1995B6MXX  1995 MICRO-SET PLS 
   AMETEK GEMCO 1986GG-2-D5-S-X  1986GG RESOLVER, 3” X 4 3/8” SQUARE FLANGE MOUNT, 5/8” INPUT SHAFT, SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.RESOLVER NO. 04535076,  
   AMETEK GEMCO 950MD019500XR  SENSOR 
   AMETEK GEMCO 1986XP-2-X  1986XP EXPLOSION PROOF RESOLVER, 4.50” SQUARE MOUNT, 3/8” INPUT SHAFT, SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.RESOLVER NO. 0453507 
   AMETEK GEMCO 1986XP-1-X  1986XP EXPLOSION PROOF RESOLVER, 4.50” SQUARE MOUNT, 3/8” INPUT SHAFT, STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.RESOLVER NO. 04535 
     AMETEK GEMCO 1989-KP  REPLACEMENT KEYPAD WITH FLAT RIBBON CABLE, 18 INCHES LONG 
   AMETEK GEMCO 2500CBARA0A8DX12  2500 PROGRAMMABLE LIMIT SWITCH 
    AMETEK GEMCO 1995-A-6M-X  PROGRAMMABLE LIMIT SWITCH BRAKING SYSTEM MICRO SET 
    AMETEK GEMCO 1995-A-6M-X-X  PROGRAMMABLE LIMIT SWITCH 6OUTPUT RELAY 10AMP 
   AMETEK GEMCO 9501510  TRANSDUCER 
   AMETEK GEMCO 951AV0114XXC12  SENSOR 
   AMETEK GEMCO 1986E-2-X-R-S  1986E RESOLVER; 100MM FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER.; ALL STAINLESS S 
   AMETEK GEMCO 1986E-1-X-R-S  1986E RESOLVER; 100MM FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES; SINGLE TURN RESOLVER.; ALL STAINLESS 
   AMETEK GEMCO 1986C-2-X-S-S  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.; SINGLE TURN RESOLVER.; SIDE  
   AMETEK GEMCO 951AV0195N2D5C12  SENSOR 
   AMETEK GEMCO 19861546  RESOLVER 
   AMETEK GEMCO 1986C-1-X-S-S  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER.; SID 
    AMETEK GEMCO 1746R-2  TWO AXIS RESOLVER INTERFACE, TWO RESOLVER INPUTS OR FIELD CONFIGURABLE FOR ONE MULTI-TURN DUAL RESOLVER 
   AMETEK GEMCO SD2842CS10L  RESOLVER 
   AMETEK GEMCO 1986C-2-X-R-S  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER.; STA 
    AMETEK GEMCO 1995-A-6A-X  PROGRAMMABLE LIMIT SWITCH BRAKING SYSTEM MICRO SET 
   AMETEK GEMCO 1986C-1-X-R-S  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER.; STA 
   AMETEK GEMCO 1986H-2-D3-S-X  1986H RESOLVER, SERVO MOUNT, 1/4” INPUT SHAFT, SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.RESOLVER NO. 04535076, 2 RESOLVERS, 100:1 RA 
   AMETEK GEMCO 1986GG-2-D3-S-X  1986GG RESOLVER, 3” X 4 3/8” SQUARE FLANGE MOUNT, 5/8” INPUT SHAFT, SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.RESOLVER NO. 04535076,  
   AMETEK GEMCO 1986GG-2-D4-S-X  1986GG RESOLVER, 3” X 4 3/8” SQUARE FLANGE MOUNT, 5/8” INPUT SHAFT, SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.RESOLVER NO. 04535076,  

AMETEK GEMCO 1986MD-2-AR-2-VT1  1986MD MILL DUTY RESOLVER; 1/4” PLATE STEEL HOUSING WITH HINGED 10 GA. SHEET METAL COVER SIZED FOR SINGLE TURN RESOLVER.; STD. 3/4” INPUT SHAFT EXITIN 
   AMETEK GEMCO 1986MD-2-AL-2-VT1  1986MD MILL DUTY RESOLVER; 1/4” PLATE STEEL HOUSING WITH HINGED 10 GA. SHEET METAL COVER SIZED FOR SINGLE TURN RESOLVER.; STD. 3/4” INPUT SHAFT EXITIN 
   AMETEK GEMCO 1986MD-1-AR-2-VT1  1986MD MILL DUTY RESOLVER; 1/4” PLATE STEEL HOUSING WITH PLATE STEEL BOLTED COVER SIZED FOR SINGLE TURN RESOLVER.; STD. 3/4” INPUT SHAFT EXITING THE R 
   AMETEK GEMCO 1986MD-1-AL-2-VT1  1986MD MILL DUTY RESOLVER; 1/4” PLATE STEEL HOUSING WITH PLATE STEEL BOLTED COVER SIZED FOR SINGLE TURN RESOLVER.; STD. 3/4” INPUT SHAFT EXITING THE L 
   AMETEK GEMCO 9501446-230-0120  950 INTRINSICALLY SAFE LDT, 230 VDC INPUT POWER, 12INCH STROKE 
   AMETEK GEMCO 9501446-115-0120  950 INTRINSICALLY SAFE LDT, 115 VDC INPUT POWER, 12INCH STROKE 
     AMETEK GEMCO 1994L-LI/O1TLV12  DISPLAY MONITOR VP LD 
   AMETEK GEMCO 1986MD-2-AR-1-VT1  1986MD MILL DUTY RESOLVER; 1/4” PLATE STEEL HOUSING WITH HINGED 10 GA. SHEET METAL COVER SIZED FOR SINGLE TURN RESOLVER.; STD. 3/4” INPUT SHAFT EXITIN 
   AMETEK GEMCO 1986MD-2-AL-1-VT1  1986MD MILL DUTY RESOLVER; 1/4” PLATE STEEL HOUSING WITH HINGED 10 GA. SHEET METAL COVER SIZED FOR SINGLE TURN RESOLVER.; STD. 3/4” INPUT SHAFT EXITIN 
   AMETEK GEMCO 1986MD-1-AR-1-VT1  1986MD MILL DUTY RESOLVER; 1/4” PLATE STEEL HOUSING WITH PLATE STEEL BOLTED COVER SIZED FOR SINGLE TURN RESOLVER.; STD. 3/4” INPUT SHAFT EXITING THE R 
   AMETEK GEMCO 1986MD-1-AL-1-VT1  1986MD MILL DUTY RESOLVER; 1/4” PLATE STEEL HOUSING WITH PLATE STEEL BOLTED COVER SIZED FOR SINGLE TURN RESOLVER.; STD. 3/4” INPUT SHAFT EXITING THE L 
   AMETEK GEMCO PSD0180101  REMOTE 
   AMETEK GEMCO 1986G-2-GR50-S-X  1986G RESOLVER, 3” X 4 3/4” SQUARE FLANGE MOUNT, 5/8” INPUT SHAFT, SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.RESOLVER NO. 04535076, S 
   AMETEK GEMCO 9501446-24-0120  950 INTRINSICALLY SAFE LDT, 24 VDC INPUT POWER, 12INCH STROKE 
   AMETEK GEMCO 1986A-2-X-S-X  1986A RESOLVER; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; SIDE MOUNT CONNECTOR 
   AMETEK GEMCO 1986G-1-GR50-S-X  1986G RESOLVER, 3” X 4 3/4” SQUARE FLANGE MOUNT, 5/8” INPUT SHAFT, STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.RESOLVER NO. 04535001, 
    AMETEK GEMCO 1746L-1  SINGLE AXIS LDT INTERFACE, ONE LDT INPUT 
     AMETEK GEMCO 1746R-1  SINGLE AXIS RESOLVER INTERFACE, ONE RESOLVER INPUT 
    AMETEK GEMCO 2000855  2000 ROTARY LIMIT SWITCH, WITH POTENTIOMETER, TWO CIRCUIT DPDT, SYMBOL B, NEMA 4 
   AMETEK GEMCO 1986B-1-X-S-P  1986B RESOLVER; 2.25” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; SIDE 
   AMETEK GEMCO 1986D-2-X-S-E  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; SIDE MOU 
     AMETEK GEMCO 1989-0-115-A-E  OUTPUT MODULE 16 CIRCUIT HIGH POWERED 115V 
   AMETEK GEMCO 1986D-1-X-S-E  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; SIDE  
     AMETEK GEMCO 951AV0520N2D5E  TRANSDUCER LINEAR 52INCH STROKE 
   AMETEK GEMCO 19802097  LIMIT SWITCH 
   AMETEK GEMCO 19890115MS  MODULE 
   AMETEK GEMCO 1980R-104-L-SP-X  1992 PRESS-SET CONTROLLER, 4 CIRCUIT NEMA 1, LEFT HAND SHAFT CAM-RESOLVER COMBINATION UNIT 
   AMETEK GEMCO 1980R-104-R-SP-X  1992 PRESS-SET CONTROLLER, 4 CIRCUIT NEMA 1, RIGHT HAND SHAFT CAM-RESOLVER COMBINATION UNIT 
   AMETEK GEMCO 20002982  LIMIT SWITCH 
   AMETEK GEMCO 953AC40130XXSX  MODULE 
   AMETEK GEMCO 1986D-2-X-R-E  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; STANDARD 
   AMETEK GEMCO 20002086  MODULE 
   AMETEK GEMCO 2110V1K1D0A0N0  MONITOR 
   AMETEK GEMCO 1986A-2-X-S-P  1986A RESOLVER; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; SIDE MOUNT CONNECTOR; ADDITIONAL PROTECTIVE SHAFT SE 
     AMETEK GEMCO SD-3311-C  RESOLVER BOARD 
   AMETEK GEMCO 1986D-1-X-R-E  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; STAND 
    AMETEK GEMCO 2110R1K0D0N0  SHUT HEIGHT MONITOR 
    AMETEK GEMCO 2120R1K0D0N0  ENCODER MODULE 
   AMETEK GEMCO 1980107  1980 ROTATING CAM LIMIT SWITCH 
   AMETEK GEMCO 1986A-1-X-S-P  1986A RESOLVER; STANDARD OUTPUT COMPATIBLE WITH ALLGEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; SIDE MOUNT CONNECTOR; ADDITIONAL PROTECTIVE SHAFT  
   AMETEK GEMCO 951AV0480XXC33  SENSOR 
   AMETEK GEMCO 20001135B  2000 ROTARY LIMIT SWITCH, MAXIMUM SPEED - 1000 RPM WORM GEAR TYPE, STANDARD TWO CAM DPDT, NEMA 7 
   AMETEK GEMCO 2110V1K1D0N0  MONITOR 
   AMETEK GEMCO 8060-4896  ASSEMBLY CATRACK 114INCH LONG 
   AMETEK GEMCO 2110V1K0D0A0N0  MONITOR SHUT HEIGHT MONITOR 
   AMETEK GEMCO 952AV10330XX5  ENCODER 
   AMETEK GEMCO 1980R-102-R-SP-X  1992 PRESS-SET CONTROLLER, 2 CIRCUIT NEMA 1, RIGHT HAND SHAFT CAM-RESOLVER COMBINATION UNIT 
   AMETEK GEMCO 1980R-102-L-SP-X  1992 PRESS-SET CONTROLLER, 2 CIRCUIT NEMA 1, LEFT HAND SHAFT CAM-RESOLVER COMBINATION UNIT 
    AMETEK GEMCO 951AV0600XXE  NON-CONTACT LINEAR TRANSDUCER QUICK-STIK II 60INCH 
   AMETEK GEMCO 1986A-2-X-R-P  1986A RESOLVER; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; STANDARD REAR MOUNT CONNECTOR; ADDITIONAL PROTECTIVE 
AMETEK GEMCO 9501445-0120  950 INTRINSICALLY SAFE LDT; INTRINSICALLY SAFE LDT 
   AMETEK GEMCO 7330XME094F1104X  MODULE 
   AMETEK GEMCO 1986A-1-X-R-P  1986A RESOLVER; STANDARD OUTPUT COMPATIBLE WITH ALLGEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; STANDARD REAR MOUNT CONNECTOR; ADDITIONAL PROTECTI 
   AMETEK GEMCO 951AC10040XXE  TRANSDUCER 
   AMETEK GEMCO 1986D-2-X-S-P  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; SIDE MOU 
     AMETEK GEMCO 951VP-1992-12  LINEAR DISTANCE TRANSDUCER QUICK-STIK 2 
   AMETEK GEMCO 950MD24AOBOCXF  CYLINDER 
   AMETEK GEMCO 1986E-2-X-R-P  1986E RESOLVER; 100MM FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER.; STANDARD REAR M 
   AMETEK GEMCO 1986D-1-X-S-P  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; SIDE  
   AMETEK GEMCO 1986B-2-X-S-P  1986B RESOLVER; 2.25” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.; SINGLE TURN RESOLVER; SIDE M 
   AMETEK GEMCO 1986E-1-X-R-P  1986E RESOLVER; 100MM FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES; SINGLE TURN RESOLVER.; STANDARD REAR 
   AMETEK GEMCO 1986C-2-X-S-P  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.; SINGLE TURN RESOLVER.; SIDE  
   AMETEK GEMCO 951AV0140N2D5C12  SENSOR 
   AMETEK GEMCO 951AV0065N2D5C12  SENSOR 
   AMETEK GEMCO 951A-V-0120-X-X-C  951A QUIK-STIK II LDT; VOLTAGE; STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.;POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 951A-V-0120-X-X-E  951A QUIK-STIK II LDT; VOLTAGE; STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.; ENVIRONMENTAL MS CONNECTOR 
   AMETEK GEMCO 951A-V-0120-X-D-C  951A QUIK-STIK II LDT; VOLTAGE; STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.25 INCHES.;POTTED PIGT 
   AMETEK GEMCO 951A-V-0120-X-D-E  951A QUIK-STIK II LDT; VOLTAGE; STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.25 INCHES.; ENVIRONMEN 
   AMETEK GEMCO 951A-V-0120-N-X-C  951A QUIK-STIK II LDT; VOLTAGE; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.;POTTED PIGT 
   AMETEK GEMCO 951A-V-0120-N-X-E  951A QUIK-STIK II LDT; VOLTAGE; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.; ENVIRONMEN 
   AMETEK GEMCO 951A-V-0120-N-D-E  951A QUIK-STIK II LDT; VOLTAGE; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVE 
   AMETEK GEMCO 951A-V-0120-N-D-C  951A QUIK-STIK II LDT; VOLTAGE; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVE 
   AMETEK GEMCO 951A-C2-0120-X-X-C  951A QUIK-STIK II LDT; 4-20MA UNGROUNDED STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.;POTTED PIGTAIL CABLE ASSEMBL 
   AMETEK GEMCO 951A-C2-0120-X-X-E  951A QUIK-STIK II LDT; 4-20MA UNGROUNDED STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.; ENVIRONMENTAL MS CONNECTOR 
   AMETEK GEMCO 951A-C2-0120-X-D-E  951A QUIK-STIK II LDT; 4-20MA UNGROUNDED STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.25 INCHES.; E 
   AMETEK GEMCO 951A-C2-0120-X-D-C  951A QUIK-STIK II LDT; 4-20MA UNGROUNDED STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.25 INCHES.;PO 
   AMETEK GEMCO 951A-C2-0120-N-X-E  951A QUIK-STIK II LDT; 4-20MA UNGROUNDED STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.; E 
   AMETEK GEMCO 951A-C2-0120-N-D-E  951A QUIK-STIK II LDT; 4-20MA UNGROUNDED STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD 
   AMETEK GEMCO 951A-C1-0120-X-X-E  951A QUIK-STIK II LDT; 4-20MA GROUNDED, STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.; ENVIRONMENTAL MS CONNECTOR 
   AMETEK GEMCO 951A-C2-0120-N-X-C  951A QUIK-STIK II LDT; 4-20MA UNGROUNDED STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.;PO 
   AMETEK GEMCO 951A-C2-0120-N-D-C  951A QUIK-STIK II LDT; 4-20MA UNGROUNDED STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD 
   AMETEK GEMCO 951A-C1-0120-X-X-C  951A QUIK-STIK II LDT; 4-20MA GROUNDED, STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.;POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 951A-C1-0120-X-D-C  951A QUIK-STIK II LDT; 4-20MA GROUNDED, STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.25 INCHES.;POT 
   AMETEK GEMCO 951A-C1-0120-X-D-E  951A QUIK-STIK II LDT; 4-20MA GROUNDED, STROKE LENGTH; NULL ZONE: STANDARD 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.25 INCHES.; EN 
   AMETEK GEMCO 951A-C1-0120-N-X-C  951A QUIK-STIK II LDT; 4-20MA GROUNDED, STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.;POT 
   AMETEK GEMCO 951A-C1-0120-N-X-E  951A QUIK-STIK II LDT; 4-20MA GROUNDED, STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: STANDARD 2.25 INCHES.; EN 
   AMETEK GEMCO 951A-C1-0120-N-D-C  951A QUIK-STIK II LDT; 4-20MA GROUNDED, STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD  
   AMETEK GEMCO 951A-C1-0120-N-D-E  951A QUIK-STIK II LDT; 4-20MA GROUNDED, STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 1.5 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD  
   AMETEK GEMCO 1986A-2-X-R-X  1986A RESOLVER; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; STANDARD REAR MOUNT CONNECTOR 
   AMETEK GEMCO 1986D-2-X-R-P  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; STANDARD 
   AMETEK GEMCO 1986C-1-X-S-P  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER.; SID 
   AMETEK GEMCO 953D-VP-0120-M-X-X-M-E-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; 6 PIN DIN, MTS STYLE D60; EXTERNAL INTERROGAT 
   AMETEK GEMCO 953D-VP-0120-M-X-X-M-I-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; 6 PIN DIN, MTS STYLE D60; INTERNAL INTERROGAT 
   AMETEK GEMCO 953D-VP-0120-M-X-D-M-E-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND; 6 PIN DIN, MTS STYLE D60; EXTERNAL  
   AMETEK GEMCO 953D-VP-0120-M-X-D-M-I-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND; 6 PIN DIN, MTS STYLE D60; INTERNAL  
   AMETEK GEMCO 953D-VP-0120-M-N-X-M-E-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; 6 PIN DIN, MTS STYLE D60; EXTERNA 
   AMETEK GEMCO 953D-VP-0120-M-N-X-M-I-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; 6 PIN DIN, MTS STYLE D60; INTERNA 
   AMETEK GEMCO 953D-VP-0120-M-N-D-M-I-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; 6 PIN DIN, MTS STYLE D6 
   AMETEK GEMCO 953D-VP-0120-M-N-D-M-E-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; 6 PIN DIN, MTS STYLE D6 
   AMETEK GEMCO 953D-RS-0120-M-X-X-M-S-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D 
AMETEK GEMCO 953D-RS-0120-M-X-X-M-S-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-RS-0120-M-X-X-M-S-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-RS-0120-M-X-D-M-S-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, M 
   AMETEK GEMCO 953D-RS-0120-M-X-D-M-S-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, M 
   AMETEK GEMCO 953D-RS-0120-M-X-D-M-S-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, M 
   AMETEK GEMCO 953D-RS-0120-M-N-X-M-S-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE' DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 953D-RS-0120-M-N-X-M-S-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 953D-RS-0120-M-N-X-M-S-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 953D-RS-0120-M-N-D-M-S-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 
   AMETEK GEMCO 953D-RS-0120-M-N-D-M-S-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 
   AMETEK GEMCO 953D-RS-0120-M-N-D-M-S-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 
   AMETEK GEMCO 953D-CP-0120-M-X-X-M-S-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D60; STAINL 
   AMETEK GEMCO 953D-CP-0120-M-X-X-M-S-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D60; STAINL 
   AMETEK GEMCO 953D-CP-0120-M-X-X-M-S-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D60; STAINL 
   AMETEK GEMCO 953D-CP-0120-M-X-D-M-S-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-CP-0120-M-X-D-M-S-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-CP-0120-M-X-D-M-S-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-CP-0120-M-N-X-M-S-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE' DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE  
   AMETEK GEMCO 953D-CP-0120-M-N-X-M-S-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE  
   AMETEK GEMCO 953D-CP-0120-M-N-X-M-S-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE  
   AMETEK GEMCO 953D-CP-0120-M-N-D-M-S-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 953D-CP-0120-M-N-D-M-S-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 953D-CP-0120-M-N-D-M-S-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 1986I-2-X-S-X  1986I RESOLVER; 4.0” ROUND FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.; SINGLE TURN RESOLVER. NO GEAR RE 
   AMETEK GEMCO 19891672  MODULE 
    AMETEK GEMCO 2110V1K0D0N0  SHUT HEIGHT MONITOR  
     AMETEK GEMCO 1986A1XRX  2500 PROGRAMMABLE LIMIT SWITCH RESOLVERS, INDUSTRIAL DUTY FOOT MOUNT RESOLVER 
    AMETEK GEMCO 1986-2004  2110 SHUT HEIGHT MONITOR ACCESSORIES, RESOLVER 
   AMETEK GEMCO 1986D-2-X-S-X  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; SIDE MOU 
   AMETEK GEMCO 1986D-1-X-R-P  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; STAND 
   AMETEK GEMCO 952VP-0120-X-D-T-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; TEMPOSONIC “T” CONNECTOR; EX 
   AMETEK GEMCO 952VP-0120-X-D-T-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; TEMPOSONIC “T” CONNECTOR; IN 
   AMETEK GEMCO 952VP-0120-N-X-T-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; TEMPOSONIC “T” CONNECTOR; INT 
   AMETEK GEMCO 952VP-0120-N-X-T-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; TEMPOSONIC “T” CONNECTOR; EXT 
   AMETEK GEMCO 952VP-0120-N-D-T-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; TE 
   AMETEK GEMCO 952VP-0120-N-D-T-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; TE 
   AMETEK GEMCO 952RS-0120-X-D-T  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; THREADED METAL CONNECTOR, 
   AMETEK GEMCO 952RS-0120-N-X-T  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:INSERT NON-STANDARD NULL ZONE OVER 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; THREADED METAL CONNECTOR, 
   AMETEK GEMCO 952RS-0120-N-D-T  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:INSERT NON-STANDARD NULL ZONE OVER 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; THR 
   AMETEK GEMCO 1986B-2-X-R-P  1986B RESOLVER; 2.25” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.; SINGLE TURN RESOLVER; STANDA 
   AMETEK GEMCO 953D-VP-0120-M-X-X-S-I-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; INTERNAL INTERROGA 
   AMETEK GEMCO 953D-VP-0120-M-X-X-S-E-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; EXTERNAL INTERROGA 
   AMETEK GEMCO 953D-VP-0120-M-X-D-S-I-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND; STANDARD 6 PIN, 12MM EURO; INTERNAL 
   AMETEK GEMCO 953D-VP-0120-M-X-D-S-E-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND; STANDARD 6 PIN, 12MM EURO; EXTERNAL 
   AMETEK GEMCO 953D-VP-0120-M-N-X-S-I-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; INTERN 
   AMETEK GEMCO 953D-VP-0120-M-N-X-S-E-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; EXTERN 
   AMETEK GEMCO 953D-VP-0120-M-N-D-S-I-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; STANDARD 6 PIN, 12MM EU 
   AMETEK GEMCO 953D-VP-0120-M-N-D-S-E-001-S-M  953D-VP VMAX? LDT; VARIABLE PULSE; METRIC; NULL ZONE: INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; STANDARD 6 PIN, 12MM EU 
   AMETEK GEMCO 953D-RS-0120-M-X-X-S-S-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-RS-0120-M-X-X-S-S-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM E 
AMETEK GEMCO 953D-RS-0120-M-X-X-S-S-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-RS-0120-M-X-D-S-S-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 P 
   AMETEK GEMCO 953D-RS-0120-M-X-D-S-S-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 P 
   AMETEK GEMCO 953D-RS-0120-M-X-D-S-S-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 P 
   AMETEK GEMCO 953D-RS-0120-M-N-X-S-S-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-RS-0120-M-N-X-S-S-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-RS-0120-M-N-X-S-S-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-RS-0120-M-N-D-S-S-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: S 
   AMETEK GEMCO 953D-RS-0120-M-N-D-S-S-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: S 
   AMETEK GEMCO 953D-RS-0120-M-N-D-S-S-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: S 
   AMETEK GEMCO 953D-CP-0120-M-X-X-S-S-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM EURO; STAIN 
   AMETEK GEMCO 953D-CP-0120-M-X-X-S-S-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM EURO; STAIN 
   AMETEK GEMCO 953D-CP-0120-M-X-X-S-S-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM EURO; STAIN 
   AMETEK GEMCO 953D-CP-0120-M-X-D-S-S-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-CP-0120-M-X-D-S-S-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-CP-0120-M-X-D-S-S-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-CP-0120-M-N-X-S-S-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM  
   AMETEK GEMCO 953D-CP-0120-M-N-X-S-S-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM  
   AMETEK GEMCO 953D-CP-0120-M-N-X-S-S-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM  
   AMETEK GEMCO 953D-CP-0120-M-N-D-S-S-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-CP-0120-M-N-D-S-S-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-CP-0120-M-N-D-S-S-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953A-V1-0120-M-X-X-S-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-X-S-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-X-S-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-X-C-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-X-C-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-X-C-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-S-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-S-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-S-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-C-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-C-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-C-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-S-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-S-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-S-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-C-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-C-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-C-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-S-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-S-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-S-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-C-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-C-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-C-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-X-S-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-X-S-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; US THREAD 
   AMETEK GEMCO 953A-V0-0120-M-X-X-S-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; US THREAD 
   AMETEK GEMCO 953A-V0-0120-M-X-X-C-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; US THREAD 
AMETEK GEMCO 953A-V0-0120-M-X-X-C-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; US THREAD 
   AMETEK GEMCO 953A-V0-0120-M-X-X-C-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-S-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-S-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-S-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-C-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-C-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-C-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-S-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-S-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-S-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-C-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-C-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-C-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-S-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-S-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-S-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-C-S-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-C-S-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-C-S-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 1986I-1-X-S-X  1986I RESOLVER; 4.0” ROUND FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER. NO GEAR  
   AMETEK GEMCO 952QD0360XXE1000  INCOMPLETE CONFIGURED PART, CALL TO ORDER., 952QD BLUEOX? LDT DIGITAL VERSION - QUADRATURE, 36 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAN 
   AMETEK GEMCO 19882401HF  MODULE 
   AMETEK GEMCO 1986E-2-X-R-X  1986E RESOLVER; 100MM FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER.; STANDARD REAR M 
   AMETEK GEMCO 1986D-1-X-S-X  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; SIDE  
   AMETEK GEMCO 1986B-2-X-S-X  1986B RESOLVER; 2.25” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.; SINGLE TURN RESOLVER; SIDE M 
   AMETEK GEMCO 1986B-1-X-R-P  1986B RESOLVER; 2.25” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; STAN 
   AMETEK GEMCO 1986C-2-X-R-P  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.; SINGLE TURN RESOLVER.; STAND 
   AMETEK GEMCO SD0334000  BOARD 
   AMETEK GEMCO 1999OPT5YRWRNTY  1999 SEMELEX II SAFETIMETER TEST SET, FIVE YEAR LIMITED WARRANTY 
   AMETEK GEMCO 953AC40030MXXS  SENSOR 
   AMETEK GEMCO 1986E-1-X-R-X  1986E RESOLVER; 100MM FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES; SINGLE TURN RESOLVER.; STANDARD REAR 
    AMETEK GEMCO 1988M12X  MICRO COMPUTER QUICK SET II 
   AMETEK GEMCO 2000161B  2000 ROTARY LIMIT SWITCH, MAXIMUM SPEED - 1000 RPM WORM GEAR TYPE, STANDARD TWO CAM DPDT, NEMA 7 
   AMETEK GEMCO 1986B-1-X-S-X  1986B RESOLVER; 2.25” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; SIDE 
   AMETEK GEMCO 952VP-0120-X-X-T-I-001  952VP BLUEOX? LDT DIGITAL VERSION - VARIABLE PULSE, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, TEMPOSONIC “T” CONNECTOR, INTERNAL IN 
   AMETEK GEMCO 952VP-0120-X-X-T-E-001  952VP BLUEOX? LDT DIGITAL VERSION - VARIABLE PULSE, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, TEMPOSONIC “T” CONNECTOR, EXTERNAL IN 
   AMETEK GEMCO 952RS-0120-X-X-T  952RS BLUEOX? LDT DIGITAL VERSION - START/STOP PULSE, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, THREADED METAL CONNECTOR, FITS MTSR 
   AMETEK GEMCO 1986C-2-X-S-X  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.; SINGLE TURN RESOLVER.; SIDE  
   AMETEK GEMCO 1986C-1-X-R-P  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER.; STA 
   AMETEK GEMCO 952A-V1-0120-X-X-E  952A BLUEOX? LDT ANALOG VERSION, 10-0 VDCOUTPUT, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, ENVIRONMENTAL MS 10 PIN CONNECTOR. 
   AMETEK GEMCO 952A-V1-0120-X-X-S  952A BLUEOX? LDT ANALOG VERSION, 10-0 VDCOUTPUT, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, STANDARD 12MM 5 PIN EURO CONNECTOR. 
   AMETEK GEMCO 952A-V0-0120-X-X-S  952A BLUEOX? LDT ANALOG VERSION, 0-10 VDCOUTPUT, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, STANDARD 12MM 5 PIN EURO CONNECTOR. 
   AMETEK GEMCO 952A-V0-0120-X-X-E  952A BLUEOX? LDT ANALOG VERSION, 0-10 VDCOUTPUT, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, ENVIRONMENTAL MS 10 PIN CONNECTOR. 
   AMETEK GEMCO 952A-C4-0120-X-X-E  952A BLUEOX? LDT ANALOG VERSION, 4-20MAOUTPUT, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, ENVIRONMENTAL MS 10 PIN CONNECTOR. 
   AMETEK GEMCO 952A-C4-0120-X-X-S  952A BLUEOX? LDT ANALOG VERSION, 4-20MAOUTPUT, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, STANDARD 12MM 5 PIN EURO CONNECTOR. 
   AMETEK GEMCO 952VP-0120-X-X-C-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; POTTED PIGTAIL CABLE ASSEMBLY; INTERNAL INTERROGATION;  
   AMETEK GEMCO 952VP-0120-X-X-C-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; POTTED PIGTAIL CABLE ASSEMBLY; EXTERNAL INTERROGATION;  
   AMETEK GEMCO 952VP-0120-X-D-E-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; ENVIRONMENTAL MS CONNECTOR;  
   AMETEK GEMCO 952VP-0120-X-D-E-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; ENVIRONMENTAL MS CONNECTOR;  
AMETEK GEMCO 952VP-0120-X-D-C-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; POTTED PIGTAIL CABLE ASSEMBL 
   AMETEK GEMCO 952VP-0120-X-D-C-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; POTTED PIGTAIL CABLE ASSEMBL 
   AMETEK GEMCO 952VP-0120-N-X-E-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; ENVIRONMENTAL MS CONNECTOR; I 
   AMETEK GEMCO 952VP-0120-N-X-E-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; ENVIRONMENTAL MS CONNECTOR; E 
   AMETEK GEMCO 952VP-0120-N-X-C-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 952VP-0120-N-X-C-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES; POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 952VP-0120-N-D-E-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; EN 
   AMETEK GEMCO 952VP-0120-N-D-E-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; EN 
   AMETEK GEMCO 952VP-0120-N-D-C-I-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; PO 
   AMETEK GEMCO 952VP-0120-N-D-C-E-001  952VP BLUEOX? LDT; STOKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; PO 
   AMETEK GEMCO 952RS-0120-X-X-C  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 952RS-0120-X-D-E  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; ENVIRONMENTAL MS CONNECTOR. 
   AMETEK GEMCO 952RS-0120-X-D-C  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 952RS-0120-N-X-E  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:INSERT NON-STANDARD NULL ZONE OVER 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; ENVIRONMENTAL MS CONNECTOR. 
   AMETEK GEMCO 952RS-0120-N-X-C  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:INSERT NON-STANDARD NULL ZONE OVER 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; POTTED PIGTAIL CABLE ASSEMBL 
   AMETEK GEMCO 952RS-0120-N-D-C  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:INSERT NON-STANDARD NULL ZONE OVER 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; POT 
   AMETEK GEMCO 952RS-0120-N-D-E  952RS BLUEOX? LDT; STOKE LENGTH; NULL ZONE:INSERT NON-STANDARD NULL ZONE OVER 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; ENV 
   AMETEK GEMCO 952QD-0120-X-X-C-1000-C-F1-M1-V-L-X  952QD BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; POTTED PIGTAIL CABLE ASSEMBLY; SOURCING INPUT; 10KHZ; 
   AMETEK GEMCO 952QD-0120-X-D-C-1000-C-F1-M1-V-L-X  952QD BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; POTTED PIGTAIL CABLE ASSEMB 
   AMETEK GEMCO 952QD-0120-X-D-E-1000-C-F1-M1-V-L-X  952QD BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; ENVIRONMENTAL MS CONNECTOR. 
   AMETEK GEMCO 952QD-0120-N-X-E-1000-C-F1-M1-V-L-X  952QD BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; ENVIRONMENTAL MS CONNECTOR.; SOURCING INPUT; 10KHZ;X1 
   AMETEK GEMCO 952QD-0120-N-X-C-1000-C-F1-M1-V-L-X  952QD BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; POTTED PIGTAIL CABLE ASSEMBLY; SOURCING INPUT; 10KHZ; 
   AMETEK GEMCO 952QD-0120-N-D-C-1000-C-F1-M1-V-L-X  952QD BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; POTTED PIGTAIL CABLE ASSEMB 
   AMETEK GEMCO 952QD-0120-N-D-E-1000-C-F1-M1-V-L-X  952QD BLUEOX? LDT; STOKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES.; ENVIRONMENTAL MS CONNECTOR. 
   AMETEK GEMCO 952CP-0120-X-X-S-C  952CP BLUEOX? LDT; STROKE LENGTH; STANDARD 2 INCHES.; STANDARD 2.5 INCHES; POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 952CP-0120-X-X-S-E  952CP BLUEOX? LDT; STROKE LENGTH; STANDARD 2 INCHES.; STANDARD 2.5 INCHES; ENVIRONMENTAL MS CONNECTOR 
   AMETEK GEMCO 952CP-0120-X-D-S-E  952CP BLUEOX? LDT; STROKE LENGTH; STANDARD 2 INCHES.; INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; ENVIRONMENTAL MS CONNECTOR 
   AMETEK GEMCO 952CP-0120-X-D-S-C  952CP BLUEOX? LDT; STROKE LENGTH; STANDARD 2 INCHES.; STANDARD 2.5 INCHES; POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 952CP-0120-N-X-S-E  952CP BLUEOX? LDT; STROKE LENGTH; INSERT NON-STANDARD NULL ZONE OVER 2 INCHES.; STANDARD 2.5 INCHES; ENVIRONMENTAL MS CONNECTOR 
   AMETEK GEMCO 952CP-0120-N-X-S-C  952CP BLUEOX? LDT; STROKE LENGTH; INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; STANDARD 2.5 INCHES; POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 952CP-0120-N-D-S-C  952CP BLUEOX? LDT; STROKE LENGTH; INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; STANDARD 2.5 INCHES; POTTED PIGTAIL CABLE ASSEMBLY 
   AMETEK GEMCO 952CP-0120-N-D-S-E  952CP BLUEOX? LDT; STROKE LENGTH; INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; ENVIRONMENTAL MS CONNECT 
   AMETEK GEMCO 952A-V1-0120-X-X-C  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR:POTTED PIGTAIL CABLE ASSE 
   AMETEK GEMCO 952A-V1-0120-X-D-S  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; CONNECTOR: 
   AMETEK GEMCO 952A-V1-0120-X-D-C  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; CONNECTOR: 
   AMETEK GEMCO 952A-V1-0120-X-D-E  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; CONNECTOR: 
   AMETEK GEMCO 952A-V1-0120-N-X-S  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR: 
   AMETEK GEMCO 952A-V1-0120-N-X-E  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR: 
   AMETEK GEMCO 952A-V1-0120-N-X-C  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR: 
   AMETEK GEMCO 952A-V1-0120-N-D-S  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OV 
   AMETEK GEMCO 952A-V1-0120-N-D-E  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OV 
   AMETEK GEMCO 952A-V1-0120-N-D-C  952A BLUEOX? LDT; OUTPUT: 10-0 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OV 
   AMETEK GEMCO 952A-V0-0120-X-X-C  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR:POTTED PIGTAIL CABLE ASSE 
   AMETEK GEMCO 952A-V0-0120-X-D-S  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; CONNECTOR: 
   AMETEK GEMCO 952A-V0-0120-X-D-C  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; CONNECTOR: 
   AMETEK GEMCO 952A-V0-0120-X-D-E  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; CONNECTOR: 
   AMETEK GEMCO 952A-V0-0120-N-X-S  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR: 
   AMETEK GEMCO 952A-V0-0120-N-X-E  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR: 
   AMETEK GEMCO 952A-V0-0120-N-D-S  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OV 
   AMETEK GEMCO 952A-V0-0120-N-X-C  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR: 
AMETEK GEMCO 952A-V0-0120-N-D-C  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OV 
   AMETEK GEMCO 952A-V0-0120-N-D-E  952A BLUEOX? LDT; OUTPUT: 0-10 VDC; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OV 
   AMETEK GEMCO 952A-C4-0120-X-D-S  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; CONNECTOR:ST 
   AMETEK GEMCO 952A-C4-0120-X-X-C  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR:POTTED PIGTAIL CABLE ASSEMB 
   AMETEK GEMCO 952A-C4-0120-X-D-C  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; CONNECTOR:PO 
   AMETEK GEMCO 952A-C4-0120-X-D-E  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; CONNECTOR:EN 
   AMETEK GEMCO 952A-C4-0120-N-X-S  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR:ST 
   AMETEK GEMCO 952A-C4-0120-N-X-E  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR:EN 
   AMETEK GEMCO 952A-C4-0120-N-D-S  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 
   AMETEK GEMCO 952A-C4-0120-N-X-C  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: STANDARD 2.5 INCHES.; CONNECTOR:PO 
   AMETEK GEMCO 952A-C4-0120-N-D-E  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 
   AMETEK GEMCO 952A-C4-0120-N-D-C  952A BLUEOX? LDT; OUTPUT: 4-20MA; STROKE LENGTH; NULL ZONE: INSERT NON-STANDARD NULL ZONE OVER 2 INCHES; DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 
    AMETEK GEMCO 2120V1K0D0N0  ENCODER MODULE 
   AMETEK GEMCO 1986D-2-X-R-X  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; STANDARD 
   AMETEK GEMCO 951AC10600XXE  TRANSDUCER 
   AMETEK GEMCO 1986C-1-X-S-X  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER.; SID 
    AMETEK GEMCO SD-2836D  P.C. INTERFACE MODULE 1-30VDC 
   AMETEK GEMCO 1986D-1-X-R-X  1986D RESOLVER; 2.5” DIAMETER FACE MOUNT, 5/8” INPUT SHAFT; STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.; SINGLE TURN RESOLVER; STAND 
   AMETEK GEMCO 1986B-2-X-R-X  1986B RESOLVER; 2.25” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCIRESOLVER INPUT DEVICES; SINGLE TURN RESOLVER; STANDARD 
   AMETEK GEMCO 2001404L10E  LIMIT SWITCH 
   AMETEK GEMCO 19861536  2110 SHUT HEIGHT MONITOR ACCESSORIES, RESOLVER 
     AMETEK GEMCO SD0284200  RESOLVER 5000RPM 
   AMETEK GEMCO 952VP-0120-X-X-E-I-001  952VP BLUEOX? LDT DIGITAL VERSION - VARIABLE PULSE, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, ENVIRONMENTAL MS CONNECTOR. MATING CO 
   AMETEK GEMCO 952VP-0120-X-X-E-E-001  952VP BLUEOX? LDT DIGITAL VERSION - VARIABLE PULSE, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, ENVIRONMENTAL MS CONNECTOR. MATING CO 
   AMETEK GEMCO 952RS-0120-X-X-E  952RS BLUEOX? LDT DIGITAL VERSION - START/STOP PULSE, 12 INCH STROKE LENGTH, 2 INCH NULL ZONE, 2.5 INCH DEAD BAND, ENVIRONMENTAL MS CONNECTOR. MATINGC 
    AMETEK GEMCO 1986B1XRX  2120 INTERFACE MODULE ACCESSORIES, NEMA 4 RESOLVER 0.375 INCH INPUT SHAFT, 2.25 INCH FLANGE MOUNT 
   AMETEK GEMCO 1986C-2-X-R-X  1986C RESOLVER; 2.06” SQUARE FLANGE MOUNT, 3/8” INPUT SHAFT; SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.; SINGLE TURN RESOLVER.; STAND 
   AMETEK GEMCO 953S-0120-M-X-X-M-1--S-F-1-X-F  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GRAY; SYNCHRONOUS;MEASURES D 
   AMETEK GEMCO 953S-0120-M-X-X-M-1-G-S-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GRAY; SYNCHRONOUS;MEASURES D 
   AMETEK GEMCO 953S-0120-M-X-X-M-1-G-S-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GRAY; SYNCHRONOUS;MEASURES D 
   AMETEK GEMCO 953S-0120-M-X-X-M-1-G-A-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GRAY; AYNCHRONOUS;MEASURES D 
   AMETEK GEMCO 953S-0120-M-X-X-M-1-G-A-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GRAY; ASYNCHRONOUS;MEASURES  
   AMETEK GEMCO 953S-0120-M-X-X-M-1-B-S-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; BINARY; SYNCHRONOUS;MEASURES 
   AMETEK GEMCO 953S-0120-M-X-X-M-1-B-S-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; BINARY; SYNCHRONOUS;MEASURES 
   AMETEK GEMCO 953S-0120-M-X-X-M-1-B-A-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; BINARY; AYNCHRONOUS;MEASURES 
   AMETEK GEMCO 953S-0120-M-X-X-M-1-B-A-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; BINARY; ASYNCHRONOUS;MEASURE 
   AMETEK GEMCO 953S-0120-M-X-D-M-1--S-F-1-X-F  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GR 
   AMETEK GEMCO 953S-0120-M-X-D-M-1-G-S-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GR 
   AMETEK GEMCO 953S-0120-M-X-D-M-1-G-S-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GR 
   AMETEK GEMCO 953S-0120-M-X-D-M-1-G-A-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GR 
   AMETEK GEMCO 953S-0120-M-X-D-M-1-G-A-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; GR 
   AMETEK GEMCO 953S-0120-M-X-D-M-1-B-S-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; BI 
   AMETEK GEMCO 953S-0120-M-X-D-M-1-B-S-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; BI 
   AMETEK GEMCO 953S-0120-M-X-D-M-1-B-A-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; BI 
   AMETEK GEMCO 953S-0120-M-X-D-M-1-B-A-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; 7 PIN DIN, MTS STYLE D70; 24 BITS; BI 
   AMETEK GEMCO 2000-149B  2000 ROTARY LIMIT SWITCH, MAXIMUM SPEED - 1000 RPM WORM GEAR TYPE, STANDARD TWO CAM DPDT, NEMA 4 
   AMETEK GEMCO 956A-V1-0120-E  956A/956D-CP BLOK? LDT ANALOG VERSION, 10 TO 0 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT. ELECTRONICS SEALED TO IP 68 RATING. 
   AMETEK GEMCO 956A-C4-0120-E  956A/956D-CP BLOK? LDT ANALOG VERSION, 4 TO 20MA, 12 INCH STROKE LENGTH, WET ENVIRONMENT. ELECTRONICS SEALED TO IP 68 RATING. 
   AMETEK GEMCO 956A-V0-0120-E  956A/956D-CP BLOK? LDT ANALOG VERSION, 0 TO 10 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT. ELECTRONICS SEALED TO IP 68 RATING. 
   AMETEK GEMCO 956D-VP-0120-I-001-E  956D-VP, 956D-RS BLOK? LDT DIGITAL VERSION - VARIABLE PULSE, 12 INCH STROKE LENGTH, INTERNAL INTERROGATION, 1 RECIRCULATION, WET ENVIRONMENT. ELECTRON 
AMETEK GEMCO 956D-VP-0120-E-001-E  956D-VP, 956D-RS BLOK? LDT DIGITAL VERSION - VARIABLE PULSE, 12 INCH STROKE LENGTH, EXTERNAL INTERROGATION, 1 RECIRCULATION, WET ENVIRONMENT. ELECTRON 
   AMETEK GEMCO 956D-RS-0120-E  956D-VP, 956D-RS BLOK? LDT DIGITAL VERSION - STOP/START PULSE, 12 INCH STROKE LENGTH, WET ENVIRONMENT. ELECTRONICS SEALED TO IP 68 RATING 
   AMETEK GEMCO 956D-CP-0120-E  956A/956D-CP BLOK? LDT DIGITAL VERSION - CONTROL PULSE, 12 INCH STROKE LENGTH, WET ENVIRONMENT. ELECTRONICS SEALED TO IP 68 RATING 
   AMETEK GEMCO 953S-0120-M-X-X-S-1--S-F-1-X-F  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; GRAY; SYNCHRONOUS;MEASURES  
   AMETEK GEMCO 953S-0120-M-X-X-S-1-G-S-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; GRAY; SYNCHRONOUS;MEASURES  
   AMETEK GEMCO 953S-0120-M-X-X-S-1-G-S-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; GRAY; SYNCHRONOUS;MEASURES  
   AMETEK GEMCO 953S-0120-M-X-X-S-1-G-A-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; GRAY; AYNCHRONOUS;MEASURES  
   AMETEK GEMCO 953S-0120-M-X-X-S-1-G-A-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; GRAY; ASYNCHRONOUS;MEASURES 
   AMETEK GEMCO 953S-0120-M-X-X-S-1-B-S-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; BINARY; SYNCHRONOUS;MEASURE 
   AMETEK GEMCO 953S-0120-M-X-X-S-1-B-S-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; BINARY; SYNCHRONOUS;MEASURE 
   AMETEK GEMCO 953S-0120-M-X-X-S-1-B-A-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; BINARY; AYNCHRONOUS;MEASURE 
   AMETEK GEMCO 953S-0120-M-X-X-S-1-B-A-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: STANDARD 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; BINARY; ASYNCHRONOUS;MEASUR 
   AMETEK GEMCO 953S-0120-M-X-D-S-1--S-F-1-X-F  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; G 
   AMETEK GEMCO 953S-0120-M-X-D-S-1-G-S-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; G 
   AMETEK GEMCO 953S-0120-M-X-D-S-1-G-S-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; G 
   AMETEK GEMCO 953S-0120-M-X-D-S-1-G-A-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; G 
   AMETEK GEMCO 953S-0120-M-X-D-S-1-G-A-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; G 
   AMETEK GEMCO 953S-0120-M-X-D-S-1-B-S-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; B 
   AMETEK GEMCO 953S-0120-M-X-D-S-1-B-S-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; B 
   AMETEK GEMCO 953S-0120-M-X-D-S-1-B-A-R-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; B 
   AMETEK GEMCO 953S-0120-M-X-D-S-1-B-A-F-2-X-R  953SSI VMAX? LDT; METRIC; NULL ZONE: STANDARD 2 INCHES;DEAD BAND: INSERT NON-STANDARD DEAD BAND OVER 2.5 INCHES; STANDARD 6 PIN, 12MM EURO; 24 BITS; B 
   AMETEK GEMCO 1986C-1-X-R-X  2120 INTERFACE MODULE ACCESSORIES, NEMA 4 RESOLVER 0.375 INCH INPUT SHAFT, 2.06 INCH HOLE PATTERN 
     AMETEK GEMCO SD-0352700-D  DISPLAY QUIK SET III REMOTE 
   AMETEK GEMCO 956A-V0-0120-F  956A/956D-CP BLOK? LDT; 0 TO 10 VDC; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 956A-V1-0120-F  956A/956D-CP BLOK? LDT; 10 TO 0 VDC; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 956A-C4-0120-F  956A/956D-CP BLOK? LDT; 4 TO 20MA; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO SD0364000  NEMA 4 RESOLVER 0.375 INCH INPUT SHAFT, 2.06 INCH HOLE PATTERN 
   AMETEK GEMCO 956DQ-0120-E-1000-C-F1-D1-V-L-E  INCOMPLETE CONFIGURED PART, CALL TO ORDER., 956DQ BLOK? LDT DIGITAL VERSION - QUADRATURE, 12 INCH STROKE LENGTH, EURO 12 PIN, 12MM CONNECTOR, 1000 CYC 
   AMETEK GEMCO 956DQ-0120-E-1000-E-F1-D1-V-L-E  INCOMPLETE CONFIGURED PART, CALL TO ORDER., 956DQ BLOK? LDT DIGITAL VERSION - QUADRATURE, 12 INCH STROKE LENGTH, EURO 12 PIN, 12MM CONNECTOR, 1000 CYC 
   AMETEK GEMCO 956D-VP-0120-I-001-F  956D-VP, 956D-RS BLOK? LDT; INTERNAL INTERROGATION; 001 (STANDARD) TO 127; FRONT METAL ROD END,FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 956D-VP-0120-E-001-F  956D-VP, 956D-RS BLOK? LDT; EXTERNAL INTERROGATION; 001 (STANDARD) TO 127; FRONT METAL ROD END,FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 956D-RS-0120-F  956D-VP, 956D-RS BLOK? LDT; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 956D-CP-0120-F  956A/956D-CP BLOK? LDT; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
    AMETEK GEMCO 951A-V-0245-N2-D5-E  TRANSDUCER 24.5IN STROKE 
   AMETEK GEMCO 1989A32R12SCOUMC  CONTROLLER 
   AMETEK GEMCO 956A-V1-0120-X  956A/956D-CP BLOK? LDT ANALOG VERSION, 10 TO 0 VDC, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4”- 28 THREADS. 
   AMETEK GEMCO 956A-V0-0120-X  956A/956D-CP BLOK? LDT ANALOG VERSION, 0 TO 10 VDC, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4”- 28 THREADS. 
   AMETEK GEMCO 956A-C4-0120-X  956A/956D-CP BLOK? LDT ANALOG VERSION, 4 TO 20MA, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4”- 28 THREADS. 
   AMETEK GEMCO 956S-V2-0120-E  956S BLOK? LDT ANALOG VERSION, -10 TO 10 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT. ELECTRONICS SEALED TO IP 68 RATING. 
   AMETEK GEMCO 956S-V0-0120-E  956S BLOK? LDT ANALOG VERSION, 0 TO 10 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT. ELECTRONICS SEALED TO IP 68 RATING. 
   AMETEK GEMCO 956S-V1-0120-E  956S BLOK? LDT ANALOG VERSION, 10 TO 0 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT. ELECTRONICS SEALED TO IP 68 RATING. 
   AMETEK GEMCO 956D-VP-0120-I-001-X  956D-VP, 956D-RS BLOK? LDT DIGITAL VERSION - VARIABLE PULSE, 12 INCH STROKE LENGTH, INTERNAL INTERROGATION, 1 RECIRCULATION, NO OPTIONS - MALE PISTON  
   AMETEK GEMCO 956D-VP-0120-E-001-X  956D-VP, 956D-RS BLOK? LDT DIGITAL VERSION - VARIABLE PULSE, 12 INCH STROKE LENGTH, EXTERNAL INTERROGATION, 1 RECIRCULATION, NO OPTIONS - MALE PISTON  
   AMETEK GEMCO 956D-RS-0120-X  956D-VP, 956D-RS BLOK? LDT DIGITAL VERSION - STOP/START PULSE, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4” - 28THREADS 
   AMETEK GEMCO 956D-CP-0120-X  956A/956D-CP BLOK? LDT DIGITAL VERSION - CONTROL PULSE, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4” - 28 THREADS 
   AMETEK GEMCO 953D-RS-0120-M-X-X-M-X-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-RS-0120-M-X-X-M-X-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-RS-0120-M-X-X-M-X-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-RS-0120-M-X-D-M-X-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, M 
   AMETEK GEMCO 953D-RS-0120-M-X-D-M-X-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, M 
AMETEK GEMCO 953D-RS-0120-M-X-D-M-X-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, M 
   AMETEK GEMCO 953D-RS-0120-M-N-X-M-X-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 953D-RS-0120-M-N-X-M-X-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, M 
   AMETEK GEMCO 953D-RS-0120-M-N-X-M-X-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 953D-RS-0120-M-N-D-M-X-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 
   AMETEK GEMCO 953D-RS-0120-M-N-D-M-X-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 
   AMETEK GEMCO 953D-RS-0120-M-N-D-M-X-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 
   AMETEK GEMCO 953D-CP-0120-M-X-X-M-X-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D60; METRIC 
   AMETEK GEMCO 953D-CP-0120-M-X-X-M-X-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D60; US THR 
   AMETEK GEMCO 953D-CP-0120-M-X-X-M-X-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D60; US THR 
   AMETEK GEMCO 953D-CP-0120-M-X-D-M-X-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-CP-0120-M-X-D-M-X-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-CP-0120-M-X-D-M-X-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-CP-0120-M-N-X-M-X-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE  
   AMETEK GEMCO 953D-CP-0120-M-N-X-M-X-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE D 
   AMETEK GEMCO 953D-CP-0120-M-N-X-M-X-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: 6 PIN DIN, MTS STYLE  
   AMETEK GEMCO 953D-CP-0120-M-N-D-M-X-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 953D-CP-0120-M-N-D-M-X-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 953D-CP-0120-M-N-D-M-X-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: 6 PIN DIN,  
   AMETEK GEMCO 956S-V2-0120-F  956S BLOK? LDT; -10 TO 10 VDC; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 956S-V0-0120-F  956S BLOK? LDT; 0 TO 10 VDC; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 956S-V1-0120-F  956S BLOK? LDT; 10 TO 0 VDC; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 1990DNPLS8X  1990DN DEVICENET RESOLVER INTERFACE, 8 PROGRAMMABLE SET POINTS, NO OPTIONS 
   AMETEK GEMCO 1989A32R12SEST  MODULE 
   AMETEK GEMCO 1989CA32R12SEST  MODULE 
   AMETEK GEMCO 953D-RS-0120-M-X-X-S-X-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-RS-0120-M-X-X-S-X-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-RS-0120-M-X-X-S-X-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-RS-0120-M-X--S-X-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 P 
   AMETEK GEMCO 953D-RS-0120-M-X-D-S-X-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 P 
   AMETEK GEMCO 953D-RS-0120-M-X-D-S-X-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 P 
   AMETEK GEMCO 953D-RS-0120-M-N-X-S-X-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-RS-0120-M-N-X-S-X-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-RS-0120-M-N-X-S-X-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-RS-0120-M-N--S-X-F  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: S 
   AMETEK GEMCO 953D-RS-0120-M-N-D-S-X-R  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: S 
   AMETEK GEMCO 953D-RS-0120-M-N-D-S-X-M  953D-CP/RS VMAX? LDT; RS-422 START/STOP PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: S 
   AMETEK GEMCO 953D-CP-0120-M-X-X-S-X-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM EURO; US TH 
   AMETEK GEMCO 953D-CP-0120-M-X-X-S-X-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM EURO; METRI 
   AMETEK GEMCO 953D-CP-0120-M-X-X-S-X-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM EURO; US TH 
   AMETEK GEMCO 953D-CP-0120-M-X-D-S-X-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-CP-0120-M-X--S-X-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-CP-0120-M-X-D-S-X-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:STANDARD 2 INCHES.; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6 PIN, 12MM E 
   AMETEK GEMCO 953D-CP-0120-M-N-X-S-X-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM  
   AMETEK GEMCO 953D-CP-0120-M-N-X-S-X-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM  
   AMETEK GEMCO 953D-CP-0120-M-N-X-S-X-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: STANDARD 2.5 INCHES; CONNECTOR: STANDARD 6 PIN, 12MM  
   AMETEK GEMCO 953D-CP-0120-M-N-D-S-X-R  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-CP-0120-M-N--S-X-F  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953D-CP-0120-M-N-D-S-X-M  953D-CP/RS VMAX? LDT; CONTROL PULSE; METRIC; NULL ZONE:INSERT NON-STANDARD NULL ZONE; DEAD BAND: INSERT NON-STANDARD DEAD BAND; CONNECTOR: STANDARD 6  
   AMETEK GEMCO 953A-V1-0120-M-X-X-S-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
AMETEK GEMCO 953A-V1-0120-M-X-X-S-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-X-S-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-X-C-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-X-C-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-X-C-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-S-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-S-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-S-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-C-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-C-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-X-D-C-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-S-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-S-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-S-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-C-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-C-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-X-C-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-S-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-S-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-S-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-C-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-C-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V1-0120-M-N-D-C-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-X-S-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; US THREADS WITH RAISED FACE HEX BASE 
   AMETEK GEMCO 953A-V0-0120-M-X-X-S-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; US THREADS WITH FLAT FACE HEX BASE 
   AMETEK GEMCO 953A-V0-0120-M-X-X-S-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; METRIC THREADS WITH RAISED FACE HEX BASE 
   AMETEK GEMCO 953A-V0-0120-M-X-X-C-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; US THREADS WITH RAISED FACE HEX BASE 
   AMETEK GEMCO 953A-V0-0120-M-X-X-C-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; METRIC THREADS WITH RAISED FACE HEX BASE 
   AMETEK GEMCO 953A-V0-0120-M-X-X-C-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; US THREADS WITH FLAT FACE HEX BASE 
   AMETEK GEMCO 953A-V0-0120-M-X-D-S-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-S-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-S-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-C-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-C-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-X-D-C-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-S-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-S-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-S-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-C-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-C-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-X-C-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-S-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-S-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-S-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-C-X-R  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-C-X-M  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 953A-V0-0120-M-N-D-C-X-F  953A VMAX? LDT; 0 TO 10 VDC; METRIC; STANDARD 2 INCHES; STANDARD 2.5 INCHES.;STANDARD 5 PIN, 12MM EURO; STAINLESS STEEL COVER AND CONNECTOR; METRIC TH 
   AMETEK GEMCO 956S-V2-0120-X  956S BLOK? LDT ANALOG VERSION, -10 TO 10 VDC, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4” -28 THREADS 
   AMETEK GEMCO 956S-V1-0120-X  956S BLOK? LDT ANALOG VERSION, 10 TO 0 VDC, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4” -28 THREADS 
   AMETEK GEMCO 956S-V0-0120-X  956S BLOK? LDT ANALOG VERSION, 0 TO 10 VDC, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4” -28 THREADS 
AMETEK GEMCO SD0343500  DISPLAY 
   AMETEK GEMCO SD0502200  AUTOHAND WITHOUT ACCESSORIES 
   AMETEK GEMCO 1986F-2-X-R-X  1986F RESOLVER, 2.50” SQUARE FLANGE MOUNT, 5/8” INPUT SHAFT, SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.RESOLVER NO. 04535076, SINGLE  
   AMETEK GEMCO 1986F-2-X-S-X  1986F RESOLVER, 2.50” SQUARE FLANGE MOUNT, 5/8” INPUT SHAFT, SPECIAL OUTPUT COMPATIBLE WITH AMCI RESOLVER INPUT DEVICES.RESOLVER NO. 04535076, SINGLE  
   AMETEK GEMCO 1986F-1-X-S-X  1986F RESOLVER, 2.50” SQUARE FLANGE MOUNT, 5/8” INPUT SHAFT, STANDARD OUTPUT COMPATIBLE WITH ALL GEMCO ELECTRONIC MODULES.RESOLVER NO. 04535001, SINGL 
   AMETEK GEMCO 2500RX  2500 REMOTE OPERATOR INTERFACE, NO OPTIONS 
   AMETEK GEMCO 955DQ-0120-H-1000-C-F1-D1-V-L-E  955DQ BRIK? LDT; HRS ENVIRONMENTAL CONNECTOR; SOURCING 10KHZ DUAL MAGNET; VOLATILE; DIFFERENTIAL LINE DRIVER; WET ENVIRONMENT. ELECTRONICS SEALED TO I 
   AMETEK GEMCO 955DQ-0120-H-1000-E-F1-D1-V-L-E  955DQ BRIK? LDT; HRS ENVIRONMENTAL CONNECTOR; SINKING; 10KHZ DUAL MAGNET; VOLATILE; DIFFERENTIAL LINE DRIVER; WET ENVIRONMENT. ELECTRONICS SEALED TO I 
   AMETEK GEMCO 956LC-C4-0120-R  956LC BLOK? LDT; 4-20MA; REAR METAL ROD END, FEMALE - USED WITH OPTION “X 
   AMETEK GEMCO M0089400  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH DOUBLE, 102 TEETH 
   AMETEK GEMCO 200019B  2000 ROTARY LIMIT SWITCH, MAXIMUM SPEED - 1000 RPM WORM GEAR TYPE, STANDARD TWO CAM SPDT, NEMA 7 
   AMETEK GEMCO 20001205  SWITCH 
   AMETEK GEMCO 956LC-V1-0120-R  956LC BLOK? LDT; 10-0 VDC; REAR METAL ROD END, FEMALE - USED WITH OPTION “X 
   AMETEK GEMCO 956LC-V0-0120-R  956LC BLOK? LDT; 0-10 VDC; REAR METAL ROD END, FEMALE - USED WITH OPTION “X 
   AMETEK GEMCO 956LC-C4-0120-F  956LC BLOK? LDT; 4-20MA; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 955CA-S-V1-0120-E  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, 10 TO 0 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TOIP 68 RATING. 
   AMETEK GEMCO 955CA-S-V0-0120-E  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, 0 TO 10 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TOIP 68 RATING. 
   AMETEK GEMCO 955CA-N-V0-0120-E  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, 0 TO 10 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TOIP 68 RATING. 
   AMETEK GEMCO 955CA-N-V1-0120-E  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, 10 TO 0 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TOIP 68 RATING. 
   AMETEK GEMCO 955A-V1-0120-E  955A BRIK? GEN III LDT, 10-0 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 955A-V0-0120-E  955A BRIK? GEN III LDT, 0-10 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 955A-C4-0120-E  955A BRIK? GEN III LDT, 4-20MA, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 956LC-V1-0120-F  956LC BLOK? LDT; 10-0 VDC; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 956LC-V0-0120-F  956LC BLOK? LDT; 0-10 VDC; FRONT METAL ROD END, FEMALE - USED WITH OPTION “X”. 
   AMETEK GEMCO 955D-VP-0120-I-001-E  955D-VP BRIK? GEN III LDT, 12 INCH STROKE LENGTH, INTERNAL INTERROGATION, 1 RECIRCULATION, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 955D-VP-0120-E-001-E  955D-VP BRIK? GEN III LDT, 12 INCH STROKE LENGTH, EXTERNAL INTERROGATION, 1 RECIRCULATION, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 955D-RS-0120-E  955D-RS BRIK? GEN III LDT, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 955D-CP-0120-E  955D-CP BRIK? GEN III LDT DIGITAL VERSION - CONTROL PULSE, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 955CD-S-VP-0120-E-001-E  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, VARIABLEL PULSE, 12 INCH STROKE LENGTH, EXTERNAL INTERROGATION, 1 RECIRCULATION, WET ENVIRONMENT.ELECTR 
   AMETEK GEMCO 955CD-S-VP-0120-I-001-E  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, VARIABLEL PULSE, 12 INCH STROKE LENGTH, INTERNAL INTERROGATION, 1 RECIRCULATION, WET ENVIRONMENT.ELECTR 
   AMETEK GEMCO 955CD-S-RS-0120-E  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, RS422 START /STOP PULSE, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TOIP 68 RATING. 
   AMETEK GEMCO 955CD-S-CP-0120-E  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, CONTROL PULSE, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TOIP 68 RATING. 
   AMETEK GEMCO 955CD-N-VP-0120-I-001-E  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, VARIABLEL PULSE, 12 INCH STROKE LENGTH, INTERNAL INTERROGATION, 1 RECIRCULATION, WET ENVIRONMENT.ELECTR 
   AMETEK GEMCO 955CD-N-VP-0120-E-001-E  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, VARIABLEL PULSE, 12 INCH STROKE LENGTH, EXTERNAL INTERROGATION, 1 RECIRCULATION, WET ENVIRONMENT.ELECTR 
   AMETEK GEMCO 955CD-N-RS-0120-E  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, RS422 START /STOP PULSE, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TOIP 68 RATING. 
   AMETEK GEMCO 955CD-N-CP-0120-E  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, CONTROL PULSE, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TOIP 68 RATING. 
   AMETEK GEMCO 956LC-C4-0120-X  956LC BLOK? LDT, 4-20MA, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4” - 28 THREADS. 
   AMETEK GEMCO 955DQ-0120-E-1000-C-F1-D1-V-L-E  INCOMPLETE CONFIGURED PART, CALL TO ORDER., 955DQ BRIK? LDT DIGITAL VERSION - QUADRATURE, 12 INCH STROKE LENGTH, EURO 12 PIN, 12MMCONNECTOR., 1000 CYC 
   AMETEK GEMCO 955DQ-0120-E-1000-E-F1-D1-V-L-E  INCOMPLETE CONFIGURED PART, CALL TO ORDER., 955DQ BRIK? LDT DIGITAL VERSION - QUADRATURE, 12 INCH STROKE LENGTH, EURO 12 PIN, 12MMCONNECTOR., 1000 CYC 
   AMETEK GEMCO 955CDQ-S-0120-E-1000-C-F1-X1-V-L-E  INCOMPLETE CONFIGURED PART, CALL TO ORDER., 955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, 12 INCH STROKE LENGTH, EURO 12 PIN, 12MMCONNECTOR, 1000 CYC 
   AMETEK GEMCO 955CDQ-N-0120-E-1000-C-F1-X1-V-L-E  INCOMPLETE CONFIGURED PART, CALL TO ORDER., 955C BRIK? GEN III LDT, NORTH POLE FACING LDT, 12 INCH STROKE LENGTH, EURO 12 PIN, 12MMCONNECTOR, 1000 CYC 
   AMETEK GEMCO 956LC-V1-0120-X  956LC BLOK? LDT, 10-0 VDC, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4” - 28 THREADS. 
   AMETEK GEMCO 956LC-V0-0120-X  956LC BLOK? LDT, 0-10 VDC, 12 INCH STROKE LENGTH, NO OPTIONS - MALE PISTON 1/4” - 28 THREADS. 
   AMETEK GEMCO M0089300  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH DOUBLE, 96 TEETH 
   AMETEK GEMCO 955CA-S-V1-0120-X  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, 10 TO 0 VDC, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 955CA-S-V0-0120-X  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, 0 TO 10 VDC, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 955CA-N-V1-0120-X  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, 10 TO 0 VDC, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 955CA-N-V0-0120-X  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, 0 TO 10 VDC, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 955A-V1-0120-X  955A BRIK? GEN III LDT, 10-0 VDC, 12 INCH STROKE LENGTH, NO OPTION 
   AMETEK GEMCO 955A-V0-0120-X  955A BRIK? GEN III LDT, 0-10 VDC, 12 INCH STROKE LENGTH, NO OPTION 
AMETEK GEMCO 955A-C4-0120-X  955A BRIK? GEN III LDT, 4-20MA, 12 INCH STROKE LENGTH, NO OPTION 
   AMETEK GEMCO 955S-V3-0120-E  955S BRIK? LDT, 10 TO -10 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 955S-V2-0120-E  955S BRIK? LDT, -10 TO 10 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 955S-V1-0120-E  955S BRIK? LDT, 10 TO 0 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
   AMETEK GEMCO 955S-V0-0120-E  955S BRIK? LDT, 0 TO 10 VDC, 12 INCH STROKE LENGTH, WET ENVIRONMENT.ELECTRONICS SEALED TO IP68 RATING. 
     AMETEK GEMCO 2000-137B  2000 ROTARY LIMIT SWITCH, MAXIMUM SPEED - 1000 RPM WORM GEAR TYPE, STANDARD TWO CAM DPDT, NEMA 1 AND 12 
   AMETEK GEMCO SD0500400  POSITION/VELOCITY TRANSDUCER 
   AMETEK GEMCO 955D-VP-0120-I-001-X  955D-VP BRIK? GEN III LDT, 12 INCH STROKE LENGTH, INTERNAL INTERROGATION, 1 RECIRCULATION, NO OPTIONS 
   AMETEK GEMCO 955D-VP-0120-E-001-X  955D-VP BRIK? GEN III LDT, 12 INCH STROKE LENGTH, EXTERNAL INTERROGATION, 1 RECIRCULATION, NO OPTIONS 
   AMETEK GEMCO 955D-RS-0120-X  955D-RS BRIK? GEN III LDT, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 955D-CP-0120-X  955D-CP BRIK? GEN III LDT DIGITAL VERSION - CONTROL PULSE, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 955CD-S-CP-0120-X  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, CONTROL PULSE, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 955CD-S-RS-0120-X  955C BRIK? GEN III LDT, SOUTH POLE FACING LDT, RS422 START /STOP PULSE, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 955CD-N-CP-0120-X  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, CONTROL PULSE, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 955CD-N-RS-0120-X  955C BRIK? GEN III LDT, NORTH POLE FACING LDT, RS422 START /STOP PULSE, 12 INCH STROKE LENGTH, NO OPTIONS 
   AMETEK GEMCO 1980103LSPX  SWITCH 
   AMETEK GEMCO 2006402L270A  2006 TYPE K ROTARY LIMIT SWITCH, TWO CIRCUIT NEMA 4 ENCLOSURE, LEFT HAND SHAFT EXTENSION, 270 TO 1 RATIO, ALL SPDT 
   AMETEK GEMCO 2006402R270A  2006 TYPE K ROTARY LIMIT SWITCH, TWO CIRCUIT NEMA 4 ENCLOSURE, RIGHT HAND SHAFT EXTENSION, 270 TO 1 RATIO, ALL SPDT 
   AMETEK GEMCO 200014B  2000 ROTARY LIMIT SWITCH, MAXIMUM SPEED - 1000 RPM WORM GEAR TYPE, STANDARD TWO CAM SPDT, NEMA 4 
   AMETEK GEMCO 01681162  RACK 
     AMETEK GEMCO SD0403801L25  CABLE TO JBOX 1996 SERIES 25FT 7P 
     AMETEK GEMCO SD0441300  2110 SHUT HEIGHT MONITOR ACCESSORIES, UNIVERSAL TRANSDUCER MOUNTING KIT 
    AMETEK GEMCO 2006-404L120A  2006 TYPE K ROTARY LIMIT SWITCH, FOUR CIRCUIT NEMA 4 ENCLOSURE, LEFT HAND SHAFT EXTENSION, 120 TO 1 RATIO, ALL SPDT 
    AMETEK GEMCO 2006-404-L-5-A  2006 TYPE K ROTARY LIMIT SWITCH, FOUR CIRCUIT NEMA 4 ENCLOSURE, LEFT HAND SHAFT EXTENSION, 5 TO 1 RATIO, ALL SPDT 
    AMETEK GEMCO 2006404L80A  2006 TYPE K ROTARY LIMIT SWITCH, FOUR CIRCUIT NEMA 4 ENCLOSURE, LEFT HAND SHAFT EXTENSION, 80 TO 1 RATIO, ALL SPDT 
   AMETEK GEMCO 955S-V3-0120  955S BRIK? LDT, 10 TO -10 VDC, 12 INCH STROKE LENGTH, NO OPTION 
   AMETEK GEMCO 955S-V2-0120  955S BRIK? LDT, -10 TO 10 VDC, 12 INCH STROKE LENGTH, NO OPTION 
   AMETEK GEMCO 955S-V0-0120  955S BRIK? LDT, 0 TO 10 VDC, 12 INCH STROKE LENGTH, NO OPTION 
   AMETEK GEMCO 955S-V1-0120  955S BRIK? LDT, 10 TO 0 VDC, 12 INCH STROKE LENGTH, NO OPTION 
    AMETEK GEMCO 1980-103-RS-P-X  LIMIT SWITCH ROTATING CAM 
   AMETEK GEMCO SD0392200  REPLACEMENT SPRING ASSEMBLY, SPRING MOTOR FOR B AND C STYLE UNITS 
     AMETEK GEMCO 135101  MOTOGARD 135 
   AMETEK GEMCO M0089200  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH DOUBLE, 84 TEETH 
     AMETEK GEMCO SD0482700L25  1992 PRESS-SET CONTROLLER, HARDWARE FOR OPTIONS P OR R, CABLE TERMINATION KIT 
   AMETEK GEMCO SD0157000  MODULE 
   AMETEK GEMCO SD0432600  FACEPLATE AND KEYPAD ASSEMBLY 
    AMETEK GEMCO 2000819  2000 ROTARY LIMIT SWITCH, SPUR GEAR TYPE, FOUR CIRCUIT SPDT, SYMBOL C, NEMA 1 AND 12 
    AMETEK GEMCO SD0308900  1992 PRESS-SET CONTROLLER, REPLACEMENT RESOLVER WITH CONNECTOR 
   AMETEK GEMCO 3001-3  3001 ADJUSTABLE COUPLINGS, ADJUSTABLE COUPLINGS WITHOUT SPROCKETS, 3/4 INCH SPROCKET DRIVE 
   AMETEK GEMCO 3001-1  3001 ADJUSTABLE COUPLINGS, ADJUSTABLE COUPLINGS WITHOUT SPROCKETS, 1/2 INCH SPROCKET DRIVE 
     AMETEK GEMCO SD-0380100-C  I/O MODULE 
   AMETEK GEMCO M0089100  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH DOUBLE, 72 TEETH 
    AMETEK GEMCO 115101-2  MOTOGARD 115 
   AMETEK GEMCO 955LC-C4-0120  955LC BRIK? LDT ANALOG VERSION, 4-20MA, 12 INCH STROKE LENGTH, 
   AMETEK GEMCO 955LC-C2-0120  955LC BRIK? LDT ANALOG VERSION, 20-4MA, 12 INCH STROKE LENGTH, 
   AMETEK GEMCO 4517039  950 INTRINSICALLY SAFE LDT; INTRINSICALLY SAFE BARRIER. 
   AMETEK GEMCO 955LC-V1-0120  955LC BRIK? LDT ANALOG VERSION, 10-0 VDC, 12 INCH STROKE LENGTH, 
   AMETEK GEMCO 955LC-V0-0120  955LC BRIK? LDT ANALOG VERSION, 0-10 VDC, 12 INCH STROKE LENGTH, 
   AMETEK GEMCO P80A10K  TRANSDUCER 
    AMETEK GEMCO 1025-C-2SP-S  1025C FOOT AND PALM SWITCH; HEAVY DUTY NEMA 4 SIDE TREADLE OPERATED FOOT SWITCH; 2 CONTACT BLOCKS; PROTECTIVE SHIELD 
AMETEK GEMCO M0089000  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH DOUBLE, 60 TEETH 
   AMETEK GEMCO SD0403803  SPARE CABLE KIT BETWEEN J-BOX AND LDT 
   AMETEK GEMCO M0088500  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH DOUBLE, 72 TEETH 
   AMETEK GEMCO M0088400  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH DOUBLE, 60 TEETH 
   AMETEK GEMCO M0088300  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH DOUBLE, 54 TEETH 
     AMETEK GEMCO 2000-174B  2000 ROTARY LIMIT SWITCH, MAXIMUM SPEED - 1000 RPM WORM GEAR TYPE, STANDARD THREE CAM SPDT, NEMA 1 AND 12 
    AMETEK GEMCO 1025-C-2SP-X  1025C FOOT AND PALM SWITCH; HEAVY DUTY NEMA 4 SIDE TREADLE OPERATED FOOT SWITCH; 2 CONTACT BLOCKS 
   AMETEK GEMCO M0088200  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH DOUBLE, 48 TEETH 
   AMETEK GEMCO 04535001  RESLOVER 
   AMETEK GEMCO M0088100  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH DOUBLE, 45 TEETH 
   AMETEK GEMCO M0088900  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH DOUBLE, 48 TEETH 
   AMETEK GEMCO SD0528811  ROD STYLE LDT ACCESSORIES, OTHER ACCESSORIES, BATTERY OPERATED PROGRAMMER - CURRENT 
   AMETEK GEMCO M0088000  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH DOUBLE, 40 TEETH 
    AMETEK GEMCO 2006402L10A  2006 TYPE K ROTARY LIMIT SWITCH, TWO CIRCUIT NEMA 4 ENCLOSURE, LEFT HAND SHAFT EXTENSION, 10 TO 1 RATIO, ALL SPDT 
   AMETEK GEMCO 2006402R10A  2006 TYPE K ROTARY LIMIT SWITCH, TWO CIRCUIT NEMA 4 ENCLOSURE, RIGHT HAND SHAFT EXTENSION, 10 TO 1 RATIO, ALL SPDT 
   AMETEK GEMCO 2006402R20A  2006 TYPE K ROTARY LIMIT SWITCH, TWO CIRCUIT NEMA 4 ENCLOSURE, RIGHT HAND SHAFT EXTENSION, 20 TO 1 RATIO, ALL SPDT 
    AMETEK GEMCO 2006402R40A  2006 TYPE K ROTARY LIMIT SWITCH, TWO CIRCUIT NEMA 4 ENCLOSURE, RIGHT HAND SHAFT EXTENSION, 40 TO 1 RATIO, ALL SPDT 
   AMETEK GEMCO 2006402L5A  2006 TYPE K ROTARY LIMIT SWITCH, TWO CIRCUIT NEMA 4 ENCLOSURE, LEFT HAND SHAFT EXTENSION, 5 TO 1 RATIO, ALL SPDT 
   AMETEK GEMCO M0088800  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH DOUBLE, 42 TEETH 
   AMETEK GEMCO SD0194800  ELECTRONIC PULSE GENERATING SWITCH 
   AMETEK GEMCO 2006402L60A  2006 TYPE K ROTARY LIMIT SWITCH, TWO CIRCUIT NEMA 4 ENCLOSURE, LEFT HAND SHAFT EXTENSION, 60 TO 1 RATIO, ALL SPDT 
   AMETEK GEMCO 1025B2SPUX  1025B FOOT AND PALM SWITCH, HEAVY DUTY NEMA 4 TREADLE OPERATED FOOT SWITCH, 2 CONTACT BLOCKS, 2 SPDT, ULTRA GUARD WITH TREADLE SHIELD AND SAFETY GATE  
     AMETEK GEMCO 2000-2813  ROTARY LIMIT SWITCH RATIO 1:1 
   AMETEK GEMCO M0087900  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH DOUBLE, 36 TEETH 
   AMETEK GEMCO M0088700  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH DOUBLE, 36 TEETH 
   AMETEK GEMCO 1025B2SPSX  1025B FOOT AND PALM SWITCH, HEAVY DUTY NEMA 4 TREADLE OPERATED FOOT SWITCH, 2 CONTACT BLOCKS, 2 SPDT, TREADLE SHIELD PROVIDES TOP AND SIDE PROTECTION, 
   AMETEK GEMCO SD0481500L125  CABLE 
   AMETEK GEMCO M0088600  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH DOUBLE, 30 TEETH 
   AMETEK GEMCO 120101  MOTOGARD 120 
   AMETEK GEMCO PSD0102600  SHEAVE ASSEMBLIES, HORIZONTAL 
     AMETEK GEMCO 1025B2SPGX  1025B FOOT AND PALM SWITCH, HEAVY DUTY NEMA 4 TREADLE OPERATED FOOT SWITCH, 2 CONTACT BLOCKS, 2 SPDT, TREADLE GUARD, PROVIDES TOP PROTECTION FROM ACCI 
    AMETEK GEMCO 2000-38B  2000 ROTARY LIMIT SWITCH, MAXIMUM SPEED - 1000 RPM WORM GEAR TYPE, STANDARD TWO CAM SPDT, NEMA 1 AND 12 
    AMETEK GEMCO 1025B1SPGX  1025B FOOT AND PALM SWITCH, HEAVY DUTY NEMA 4 TREADLE OPERATED FOOT SWITCH, 1 CONTACT BLOCK, 1 SPDT, TREADLE GUARD, PROVIDES TOP PROTECTION FROM ACCID 
   AMETEK GEMCO 110350211  PUMP 
   AMETEK GEMCO SD0495800L6  CABLE - PLS MODULE TO I/O MODULE RACK 
   AMETEK GEMCO SD0481500L50  MODULE 
     AMETEK GEMCO 1996C-1-RSA-A-12  CONTROLLER 
    AMETEK GEMCO 1025-D-1SP  1025D FOOT AND PALM SWITCH, HEAVY DUTY NEMA 1 MUSHROOM BUTTON SWITCH(FOOT OR PALM), 1 CONTACT BLOCK1 SPDT 
    AMETEK GEMCO JOO3083  INDUSTRIAL BRAKES 
    AMETEK GEMCO PSD0102500  SHEAVE ASSEMBLIES, VERTICAL 
     AMETEK GEMCO 150101  MOTOGARD 150 
   AMETEK GEMCO 10251SPGX  FOOT SWITCH 
   AMETEK GEMCO M0087800  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 112 TEETH 
   AMETEK GEMCO M0087700  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 96 TEETH 
   AMETEK GEMCO M0086100  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH SINGLE, 72 TEETH 
   AMETEK GEMCO M0087600  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 84 TEETH 
   AMETEK GEMCO M0087500  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 80 TEETH 
   AMETEK GEMCO M0087400  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 72 TEETH 
   AMETEK GEMCO M0086000  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH SINGLE, 60 TEETH 
   AMETEK GEMCO M0087300  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 70 TEETH 
AMETEK GEMCO M0085900  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH SINGLE, 54 TEETH 
   AMETEK GEMCO M0085800  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH SINGLE, 48 TEETH 
   AMETEK GEMCO M0087200  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 60 TEETH 
   AMETEK GEMCO M0085700  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH SINGLE, 45 TEETH 
   AMETEK GEMCO SD0508200L35  MODULE 
   AMETEK GEMCO M0087100  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 54 TEETH 
   AMETEK GEMCO M0087000  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 48 TEETH 
   AMETEK GEMCO SD0439700L25  2110 SHUT HEIGHT MONITOR ACCESSORIES, LDT CABLE ASSEMBLY 
   AMETEK GEMCO M0086900  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 45 TEETH 
   AMETEK GEMCO M0086800  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 42 TEETH 
   AMETEK GEMCO M0086700  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 40 TEETH 
   AMETEK GEMCO M0085600  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH SINGLE, 40 TEETH 
   AMETEK GEMCO M0086400  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 35 TEETH 
   AMETEK GEMCO M0086600  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 36 TEETH 
   AMETEK GEMCO M0086300  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 32 TEETH 
   AMETEK GEMCO M0086200  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 3/4 INCH SINGLE, 30 TEETH 
   AMETEK GEMCO M0085500  3001 ADJUSTABLE COUPLINGS, SPROCKETS FOR ADJUSTABLE COUPLINGS, 1/2 INCH SINGLE, 36 TEETH 
   AMETEK GEMCO SD0334200L30  CONTROL 
   AMETEK GEMCO SD0531400L15  2500 PROGRAMMABLE LIMIT SWITCH RESOLVER CABLES, RESOLVER, RIGHT ANGLE CONNECTOR 
   AMETEK GEMCO SD0399100L15  2120 INTERFACE MODULE ACCESSORIES, RESOLVER-TO-ENCODER CABLE ASSEMBLY, RIGHT ANGLE CONNECTOR 
   AMETEK GEMCO SD0334900LXX  DUAL RESOLVER TO PROGRAMMER 
   AMETEK GEMCO 19501CAD0  SWITCH 
    AMETEK GEMCO SD0334200L15  CABLE 
    AMETEK GEMCO 1025A1DPS  FOOT SWITCH 
   AMETEK GEMCO SD1178C  CONTROL 
     AMETEK GEMCO 1950-4-C-A-BO  1950 LIMIT SWITCH 
   AMETEK GEMCO M0352900  REPLACEMENT SPRING ASSEMBLY, SPRING MOTOR FOR A1 AND A2 STYLE UNITS 
   AMETEK GEMCO PLS11  BOARD 
    AMETEK GEMCO SD4146L97  CABLE 
   AMETEK GEMCO SDO407400L20  CABLE 
   AMETEK GEMCO 195011BAAO  SWITCH 
     AMETEK GEMCO SD05008200L15  CABLE SINGLE TURN RESOLVER 1746 MODULE 15FOOT 
   AMETEK GEMCO 1950-1413  SPDT 
   AMETEK GEMCO 404L24112PP1LP47  SWITCH 
   AMETEK GEMCO 19501DABO  1950 LIMIT SWITCH, SPDT 1 NO, 1 NC, SADDLE CLAMP: SP, FRONT MOUNTING ARRANGEMENT, LEVER AND 1/2” DIA. ROLLER ASSEMBLY W/BOOT 
   AMETEK GEMCO 1950-1405  REPLACEMENT INDICATOR SWITCH, DPDT 
   AMETEK GEMCO SD0334200LXX  1992 PRESS-SET CONTROLLER, RESOLVER CABLE ASSEMBLY 
   AMETEK GEMCO SD0336300L6  PROGRAMMER TO OUTPUT MODULE W/ REMOTE RESET 
   AMETEK GEMCO SD0336100L6  PROGRAMMER TO OUTPUT MODULE 
   AMETEK GEMCO 04521187  24 PLACE TERMINAL STRIP USED ON PROGRAMMER AND OUTPUT EXPANSION MODULE 
   AMETEK GEMCO SD0422400L6  PROGRAMMER TO OUTPUT MODULE (6 FT.) 
   AMETEK GEMCO 19501408  SPDT 
    AMETEK GEMCO SD0310700  LOW POWER OPTICAL SWITCH 3 TO 30 VDC WITH ISOLATED OUTPUTS 100MA MAX. - 2 CIRCUITS 
     AMETEK GEMCO 1950-4-B-A-AO  DOUBLE POLE, DOUBLE THROW SWITCH 
   AMETEK GEMCO 404S21562Y5LP47  PUSHBUTTON / SELECTOR SWITCH 
    AMETEK GEMCO 1950-1-C-A-BO  LIMIT SWITCH SNAP SPDT FROUNT MOUNT 
     AMETEK GEMCO 1950-4-B-A-DO  SNAP SWITCH PLUNGER TYPE DPDT 110/220/440/600 
   AMETEK GEMCO SD0426700  KEYSWITCH ASSEMBLY 
   AMETEK GEMCO SD0414600LXX  925 LINEAR CABLE REEL SENSOR; REPLACEMENT CABLE ASSEMBLY 
    AMETEK GEMCO 404S21562Y5  PUSHBUTTON / SELECTOR SWITCH 
AMETEK GEMCO 404L24112PP1  PUSHBUTTON GREEN ILL. 6VOLT 
   AMETEK GEMCO SD3107C  MODULE 
   AMETEK GEMCO SD0414600L120  CABLE 
     AMETEK GEMCO 19501BAAR  1950 LIMIT SWITCH; SPDT 1 NO, 1 NC; BINDER; FRONT MOUNT; PLUNGER WITH BOOT-CAM OPERATOR 
     AMETEK GEMCO 1950-1-B-A-BO  LIMIT SWITCH SPDT 1NO/1NC 
    AMETEK GEMCO 404S32151Y  LIMIT SWITCH 2DIRECTIONAL 
     AMETEK GEMCO SD0411100  ROD STYLE LDT ACCESSORIES, OTHER ACCESSORIES, ROD SUPPORT MOUNTING BRACKET 
   AMETEK GEMCO 2500-WIN-CD  2500 PROGRAMMABLE LIMIT SWITCH WINDOWS PROGRAMMING ACCESSORIES, CD-ROM WINDOWS PROGRAMMING SOFTWARE 
    AMETEK GEMCO B404S7X162YA12LP47  SELECTOR SWITCH 
     AMETEK GEMCO 404P2311P3  PUSHBUTTON RED MUSHROOM MOMENTARY OPERATOR 
   AMETEK GEMCO SD0300800LXX  2 CONDUCTOR SHIELDED REMOTE READOUT 
   AMETEK GEMCO 1950-1414  SPDT 
   AMETEK GEMCO 04521186  16 PLACE TERMINAL STRIP USED ON PROGRAMMER AND OUTPUT EXPANSION MODULE 
   AMETEK GEMCO 404P2311P3LP47  PUSHBUTTON 
    AMETEK GEMCO 404P2311PP3  PUSHBUTTON RED MUSHROOM MOMENTARY OPERATOR 
   AMETEK GEMCO 404P1211PP1LP47  SWITCH 
     AMETEK GEMCO 1950-1404  DRIVE CHEK 2-4 CIRCUIT NEMA 4 OR 12 
    AMETEK GEMCO 19501DAA0  SWITCH 
   AMETEK GEMCO RRSHAFTSILMOD25  CONTROL 
   AMETEK GEMCO PSD0110400  NORMALLY OPEN (NO) MANUAL START SWITCH 
   AMETEK GEMCO 4517214  950 INTRINSICALLY SAFE LDT; PANEL MOUNT BRACKET FOR BARRIER. 
   AMETEK GEMCO 04523020  IAC24 RELAY 
     AMETEK GEMCO 404SS5X111YCC6  SELECTOR SWITCH 5POS MAINTAINED 
    AMETEK GEMCO B404S2X4123A3  SELECTOR SWITCH 
   AMETEK GEMCO 404P1211P1LP47  SWITCH 
     AMETEK GEMCO 1950-1-B-A-AO  SINGLE POLE, DOUBLE THROW SWITCH 
     AMETEK GEMCO 19501BAA0  1992 PRESS-SET CONTROLLER, REPLACEMENT SNAP SWITCH SPDT 
     AMETEK GEMCO 19501BADO  SNAP SWITCH SPDT CAM OPERATED 
    AMETEK GEMCO B404S2X562Y5  PUSHBUTTON LSX 
   AMETEK GEMCO T9195  9967 THERMISTORS 
   AMETEK GEMCO T9175  9967 THERMISTORS 
   AMETEK GEMCO T8195  9967 THERMISTORS 
   AMETEK GEMCO T8175  9967 THERMISTORS 
   AMETEK GEMCO 04523134  OPTO 22 RELAY, DC SOLID STATE, 3AMP,5-60 VDC, RELAY OPTION DO 
    AMETEK GEMCO SDO157100  MODULE 
   AMETEK GEMCO 04523022  1992 PRESS-SET CONTROLLER, MECHANICAL RELAY SPDT 10A 
   AMETEK GEMCO 04-523127  DC SOLID STATE RELAY, 3AMP, 5-60 VDC,RELAY OPTION D 
   AMETEK GEMCO 04-523126  AC SOLID STATE RELAY, 3AMP, 24-280 VAC,RELAY OPTION A 
   AMETEK GEMCO 04-523083  2500 PROGRAMMABLE LIMIT SWITCH SPARE PARTS, MECHANICAL RELAY SPDT 8 AMP 
   AMETEK GEMCO 04522006  TRIPLE POLE RELAYS 
   AMETEK GEMCO 04517172  1992 PRESS-SET CONTROLLER, RESOLVER CONNECTOR 
    AMETEK GEMCO SD-0157100  1992 PRESS-SET CONTROLLER, ROLLER FOLLOWER ASSEMBLY 
   AMETEK GEMCO T9165  9967 THERMISTORS 
   AMETEK GEMCO T9155  9967 THERMISTORS 
   AMETEK GEMCO T9145  9967 THERMISTORS 
   AMETEK GEMCO T9135  9967 THERMISTORS 
   AMETEK GEMCO T9125  9967 THERMISTORS 
   AMETEK GEMCO T9115  9967 THERMISTORS 
   AMETEK GEMCO T9105  9967 THERMISTORS 
   AMETEK GEMCO T9095  9967 THERMISTORS