| 详细介绍： J-58.A EATON Screw-In Cartridge Valves E-VLSC-MC001-E1 September 2013
Where measurements are critical request certified drawings. We reserve the right to change specifications without notice.
MRV2-16-K 16-
Series Part Number
Knob 02-162130
Acorn nut 02-162992
Nameplate 888967
Pressure control,
8-Series Part Number
Retaining ring 02-166712
K (Knob kit) 02-170164
Cap 02-162806
Nut 02-170159
Retaining ring is required for C and S controls. When converting
from the “S” or “C” option to the “K” option, remove retaining ring
and nut before installing the knob kit.
Pressure control,
10 & 12-Series Part Number
C (Cap) 02-170616*
S (Nut) 565558*
K (Knob kit) 565585
Knob 02-165873
Jam nut 02-170635
Set screw 001016
*These parts also used to service PUV3–10 models.
Pressure control,
16-Series Part Number
S (Nut) 565558
RV3 K (Knob kit) 565586
Knob 02-162137
Jam nut 02-170637
Set screw 000805
RV5 K (Knob Kit) 565585
Knob 02-165873
Jam nut 02-160635
Set screw 001016
RV5 C (Cap) 02–170616
Adjustment Kits
(cont.)
Notes
The only difference between the
‘‘D/B’’ and the ‘‘L/E’’ adjustment
option is the orientation of the
detent plate.
The B/E options are not available
in kit form. The only difference
between these and the D/L
versions is that the lever is
replaced with 02-165925 and an
additional 310204 set screw is
required.
NV1 10- |
放大图片
