|
切割平台技术数据TECHNICAL DATA OF CUTTING PLATFORM
|
|
Work area(x, y)x=Gentry; y=Base
|
ZAW 420-L series(L=Gentry type)
|
|
All axis are servo controlled
|
|
Motion speed in each axis
|
0-15m/min(600ipm)in X&Y axis,0-15m/min(60ipm)in Zaxis
|
|
Precision in axis
|
X,A axis±0.05mm(0.002"),Y, Z, R, axis±0.08mm(0.003")
±0.025mm per 300 mm(0.001"per ft)
|
|
Re-position precision
|
±0.05mm(0.002")
|
|
Max cutting dispersion
|
±0.06mm(0.002")
|
|
The max speed of process
|
15m/min(600ipm)
|
|
Water-dust proof system
|
All the motion part is protecting by water-dust proof system
|
|
Auto-bridge balance adjust
|
Avaliable in bridge- tybe cutting table
|
|
Power break protect
|
Complete solution for the power break protect during cutting
|
|
Sallage removal system
|
(Optional)suitable design for sallage removal system
|
|
System Lubricate
|
Auto-lubricate system(control by CNC controller).
|
|
Hopper Abrasive
|
Volume adjustable abrasive hopper(control by CNC controller)-patented
|
|
Screw pneumatic straightening system
|
Too long screw in protecting by pneumatic straightening system-patented
|
|
Drive mode in each axis
|
CNC drive by servo meter system and ball-screw, linear-guide way in X,Y&Z axis.
|
|
Motion system in X&Y axis
|
Ball screw& linear guide-way drive system from Taiwan.
(HIWIN/ABBA).servomotor in X&Y axis from Japan(FUJIL,MITSUBISHI)
|
|
Motion system in Z,A,B axis
|
“THK” guide slider and Servo motor in “Z&A” axis from Japan.
Servo motor in X&Y axis from Japan(Panasonic &YASKWA).
|
|
High pressure piping
|
φ6.35*9 meter &φ9.53*1.6meter high-pressure tube from USA.
|
放大图片
暂无相关下载
